Sony BDV-IS1000/C Operating Instructions - Page 95
Other Operations, Using the Control for HDMI Function for “BRAVIA” Sync
View all Sony BDV-IS1000/C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Other Operations Using the Control for HDMI Function for "BRAVIA" Sync This function is available on TVs with the "BRAVIA" Sync function only. By connecting Sony components that are compatible with the Control for HDMI function with an HDMI cable (not supplied), operation is simplified as below: - Theater Mode (page 96) - One-Touch Play (page 96) - System Power Off (page 97) - Volume Limit (page 97) - System Audio Control (page 97) - Language Follow (page 97) Control for HDMI is a mutual control function standard used by CEC (Consumer Electronics Control) for HDMI (High-Definition Multimedia Interface). The Control for HDMI function will not work in the following cases: - When you connect this system to a component which is not compatible with the Control for HDMI function. - A component does not have an HDMI jack. There are convenient buttons on the system's remote for operating the TV, such as THEATER, ONE-TOUCH PLAY, AV "/1. For details, see "Controlling the TV or Other Components with the Supplied Remote" (page 101) and refer to the operating instructions of the TV. ONE-TOUCH THEATER PLAY AV BRAVIA Sync STB TV BD 11 OPERATION CHANGE 22 33 Note • Depending on the connected component, the Control for HDMI function may not work. Refer to the operating instructions supplied with the component. • The Control for HDMI function may not work if you connect a component other than Sony, even if the component is compatible with the Control for HDMI function. Preparing for the Control for HDMI function (Control for HDMI - Easy Setting) The system is compatible with the Control for HDMI - Easy Setting function. If the TV is compatible with the Control for HDMI - Easy Setting function, you can set the system's [Control for HDMI] function automatically by setting the TV. For details, refer to the operating instructions of the TV. If the TV is not compatible with the Control for HDMI - Easy Setting function, set the Control for HDMI function of the system and TV manually. Note • Displayed items vary depending on the country model. 1 Make sure that the system is connected to the TV and the connected components (which should be compatible with the Control for HDMI function) using HDMI cables. 2 Turn on the TV and press [/1 to turn on the system. 3 Switch the input selector on your TV so that the signal from the system through the HDMI input appears on the TV screen. 4 Set the Control for HDMI function of the system and TV. The Control for HDMI function for the system and the connected component is simultaneously set to on. During the setting, "SCANNING" appears in the panel display. After you finish the setting, "COMPLETE" appears in the panel display. Wait until the setting is complete. 95US Other Operations