Sony CX150 Operating Instructions - Page 41
The Installation Menu
UPC - 027242728158
View all Sony CX150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
The Installation Menu The Installation menu is used for changing the settings of the projector. Picture Signal Function Installation Setup V Keystone: Side Shot: Image Flip: Background: Lamp Mode: IR Receiver: ID Mode: Direct Power On: High Altitude Mode: Information Sel: Auto 0 Off Blue Standard Front & Rear All Off Off Set: Exit: Adjustments and Settings Using a Menu Setting items V Keystone Side Shot (VPL-CX125/ CX155/CW125 only) Image Flip Background Lamp Mode IR Receiver Functions Initial setting Corrects the trapezoidal distortion caused by the projection angle. Select "Auto" for automatic correction, or "Manual" for manual correction using the v/V/b/B keys. When the bottom of the trapezoid is longer than the top : Sets a lower value. When the top of the trapezoid is longer than the bottom : Sets a higher value. Auto Corrects the horizontal trapezoidal distortion of the picture 0 using the v/V/b/B keys. When the right side is longer than the left side ( ) Set to a higher value (+ direction). When the left side is longer than the right side ( ) Set to a lower value (- direction). Set the adjustment level to "0" if you want to adjust the picture more widely using "V Keystone" only. Flips the image on the screen horizontally and/or vertically. Off • Off: The image does not flip. • HV: Flips the image horizontally and vertically. • H: Flips the image horizontally. • V: Flips the image vertically. Selects the background color of the screen when no signal Blue is input to the projector. Select "Black" or "Blue." Normally, set to "Blue." Sets the lamp brightness used during the projection. • High: Illuminates the projected image brightly. • Standard: Reduces fan noise and power consumption. The brightness of the projected image will be lower compared with the "High" setting. Standard Selects the remote control detectors (IR Receiver) on the front and rear of the projector. • Front & Rear: Activates both the front and rear detectors. • Front: Activates the front detector only. • Rear: Activates the rear detector only. Front & Rear The Installation Menu 41