Sony DCR-DVD910 Operating Guide - Page 20
Step 2: Charging the battery pack, Disconnect the AC Adaptor
UPC - 689466092851
View all Sony DCR-DVD910 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Step 2: Charging the battery pack POWER switch Battery DC IN jack CHG (charge) lamp Jack cover DC plug AC Adaptor To the wall outlet (wall socket) Power cord (mains lead) You can charge the "InfoLITHIUM" battery pack (H series) (p. 115) after attaching it to your camcorder. b Notes • Your camcorder operates only with "InfoLITHIUM" battery pack (H series). 1 Turn the POWER switch in the direction of the arrow to OFF (CHG) (the default setting). 2 Align the terminals of the battery pack and your camcorder (1), then attach the battery pack in the direction of the arrow until it clicks (2). Open the jack cover, and connect the DC plug of the AC Adaptor. Match the v mark on the DC plug with the v mark on your camcorder. 4 Connect the power cord (mains lead) to the AC Adaptor and the wall outlet (wall socket). The CHG (charge) lamp lights up and charging starts. 5 The CHG (charge) lamp turns off when the battery is fully charged. Disconnect the AC Adaptor from the DC IN jack. 3 Connect the AC Adaptor to the DC IN jack of your camcorder. 20