Sony FDR-AX1 Operating Guide - Page 22

Preparations Storing the battery pack If the battery pack is not in use for a while, run down the battery and store it. See page 55 for details on storage of the battery pack. Charging time Approximate time (minute) required when you charge a fully discharged battery pack. Battery pack NP-F970 Normal charge time Full charge time 365 425 Notes • You cannot use the NP-F570/NP-F770 battery pack with your camcorder. On the battery pack • Before changing the battery pack, slide the POWER switch to OFF. Using a wall outlet (wall socket) as a power source You can use the AC Adaptor to obtain AC power. DC IN connector AC Adaptor (ACNB12A) To the wall outlet (wall socket) Power cord (mains lead) 1. Connect the power cord (mains lead) to the AC Adaptor. 2. Connect the AC Adaptor to the DC IN connector of the camcorder. 3. Connect the power cord (mains lead) to the wall outlet (wall socket). On the AC Adaptor • Use the nearby wall outlet (wall socket) when using the AC Adaptor. Disconnect the AC Adaptor from the wall outlet (wall socket) immediately if any malfunction occurs while using your camcorder. • Do not use the AC Adaptor placed in a narrow space, such as between a wall and furniture. • Do not short-circuit the plug of the AC Adaptor with any metallic objects. This may cause a malfunction. • Even if your camcorder is turned off, AC power (house current) is still supplied to it while connected to the wall outlet (wall socket) via the AC Adaptor. • You cannot charge the camcorder by connecting it to the AC Adaptor. 22 Power Supply