Sony FDR-AX1 Operating Guide - Page 64

HDMI OUT connector, INPUT1/INPUT2 connectors

Page 64 highlights

Appendices AUDIO OUT connectors Pin connectors -10 dBu (at load impedance 47 kΩ (kilohms)), Output impedance with less than 2.2 kΩ (kilohms) (0 dBu = 0.775 Vrms) HDMI OUT connector HDMI connector (Type A) i (headphones) connector Stereo-minijack (Ø 3.5 mm) INPUT1/INPUT2 connectors XLR 3-pin, female, MIC: -50 dBu: 3 kΩ (kilohms) LINE: +4 dBu: 10 kΩ (kilohms) (0 dBu = 0.775 Vrms) USB connector Mass-storage: mini-B Host: Type A Remote connector Stereo mini-minijack (Ø 2.5 mm) LCD screen Picture 8.8 cm (3.5 type, aspect ratio 16:9) Total dot number 1 229 000 (854 × 480 × 3 [RGB]) Viewfinder Picture 0.45 type, aspect ratio 16:9 Total dot number Approx. 1 226 880 General Power requirements DC 7.2 V (battery pack) DC 12 V 2.5 A (AC Adaptor) Average power consumption During camera recording using the internal microphone and LCD with normal brightness NTSC Area: 4K: 14.5W (29.97P, 60Mbps) HD: 15.7W (59.94P, 50Mbps) PAL Area: 4K: 13.8W (25P, 60Mbps) HD: 14.9W (50P, 50Mbps) Operating temperature 0 °C to 40 °C (32 °F to 104 °F) Storage temperature -20 °C to +60 °C (-4 °F to +140 °F) 64 Specifications Dimensions (approx.) Camcorder body only (including the projecting parts): 189 mm × 193 mm × 362 mm (7 1/2 in. × 7 5/8 in. × 14 3/8 in.) (w/h/d) When recording (including the projecting parts): 189 mm × 193 mm × 413 mm (7 1/2 in. × 7 5/8 in. × 16 3/8 in.) (w/h/d) (With the accessories (battery pack (NPF970), large eyecup) attached.) Mass (approx.) Camcorder body only: 2 440 g (87 oz) When recording: 2 770 g (98 oz) (With the accessories (battery pack (NP-F970), large eyecup) attached.) AC Adaptor AC-NB12A Power requirements AC 100 V - 240 V, 50 Hz/60 Hz Current consumption 0.65 A - 0.35 A Power consumption 30 W Output voltage DC 12 V* Operating temperature 0 °C to 45 °C (32 °F to 113 °F) Storage temperature -20 °C to +60 °C (-4 °F to +140 °F) Dimensions (approx.) 49.5 mm × 28 mm × 99.5 mm (1 31/32 in. × 1 1/8 in. × 3 15/16 in.) (w/h/d) excluding the projecting parts Mass (approx.) 200 g (7.1 oz) excluding the power cord (mains lead) * See the label on the AC Adaptor for other specifications. Charger AC-VL1 Power requirements AC 100 V - 240 V, 50 Hz/60 Hz Current consumption 0.35 A - 0.18 A Power consumption 22 W Output voltage DC 8.4 V* Operating temperature 0 °C to 40 °C (32 °F to 104 °F) Storage temperature -20 °C to +60 °C (-4 °F to +140 °F)

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68

Specifications
64
Appendices
AUDIO OUT connectors
Pin connectors
-10 dBu (at load impedance 47 k
Ω
(kilohms)), Output impedance with less than
2.2 k
Ω
(kilohms)
(0 dBu = 0.775 Vrms)
HDMI OUT connector
HDMI connector (Type A)
i
(headphones) connector
Stereo-minijack (Ø 3.5 mm)
INPUT1/INPUT2 connectors
XLR 3-pin, female,
MIC: -50 dBu: 3 k
Ω
(kilohms)
LINE: +4 dBu: 10 k
Ω
(kilohms)
(0 dBu = 0.775 Vrms)
USB connector
Mass-storage: mini-B
Host: Type A
Remote connector
Stereo mini-minijack (Ø 2.5 mm)
LCD screen
Picture
8.8 cm (3.5 type, aspect ratio 16:9)
Total dot number
1 229 000 (854 × 480 × 3 [RGB])
Viewfinder
Picture
0.45 type, aspect ratio 16:9
Total dot number
Approx. 1 226 880
General
Power requirements
DC 7.2 V (battery pack)
DC 12 V 2.5 A (AC Adaptor)
Average power consumption
During camera recording using the internal
microphone and LCD with normal brightness
NTSC Area:
4K: 14.5W (29.97P, 60Mbps)
HD: 15.7W (59.94P, 50Mbps)
PAL Area:
4K: 13.8W (25P, 60Mbps)
HD: 14.9W (50P, 50Mbps)
Operating temperature
0 °C to 40 °C (32 °F to 104 °F)
Storage temperature
-20 °C to +60 °C (-4 °F to +140 °F)
Dimensions (approx.)
Camcorder body only (including the
projecting parts):
189 mm × 193 mm × 362 mm
(7 1/2 in. × 7 5/8 in. × 14 3/8 in.) (w/h/d)
When recording (including the projecting
parts):
189 mm × 193 mm × 413 mm
(7 1/2 in. × 7 5/8 in. × 16 3/8 in.) (w/h/d)
(With the accessories (battery pack (NP-
F970), large eyecup) attached.)
Mass (approx.)
Camcorder body only:
2 440 g (87 oz)
When recording:
2
770 g (98 oz) (With the accessories (battery
pack (NP-F970), large eyecup) attached.)
AC Adaptor AC-NB12A
Power requirements
AC 100 V - 240 V, 50 Hz/60 Hz
Current consumption
0.65 A - 0.35 A
Power consumption
30 W
Output voltage
DC 12 V*
Operating temperature
0 °C to 45 °C (32 °F to 113 °F)
Storage temperature
-20 °C to +60 °C (-4 °F to +140 °F)
Dimensions (approx.)
49.5 mm × 28 mm × 99.5 mm
(1 31/32 in. × 1 1/8 in. × 3 15/16 in.) (w/h/d)
excluding the projecting parts
Mass (approx.)
200 g (7.1 oz) excluding the power cord
(mains lead)
* See the label on the AC Adaptor for other
specifications.
Charger AC-VL1
Power requirements
AC 100 V - 240 V, 50 Hz/60 Hz
Current consumption
0.35 A - 0.18 A
Power consumption
22 W
Output voltage
DC 8.4 V
*
Operating temperature
0 °C to 40 °C (32 °F to 104 °F)
Storage temperature
-20 °C to +60 °C (-4 °F to +140 °F)