Sony FDR-AX1 Operating Guide - Page 62
Warning indication, on LCD/viewfinder, Buzzer, Recording, Cause and measures, Appendices
View all Sony FDR-AX1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Warning indication on LCD/viewfinder Unknown Media(A)* Please Change Buzzer Media Error Media(A) Needs to be Restored* Media Error Cannot Record to Media(A)* Media Error Cannot Use Media(A)* Will Switch Slots Soon Cannot Use Media(A)* Unsupported File System Media Error Playback Halted Media(A) Error* Media Reached Rewriting Limit Change Media(A)* Cannot Use Media(A)* Unsupported File System Battery Temperature High Intermittent Recording lamp Cause and measures A partitioned memory card or one that contains recorded clips exceeding the number permitted with this camcorder is loaded. This card cannot be used with this camcorder. Remove it and load a compatible card. An error occurred with the memory card. The card requires restoration. Remove the card, load it again, and restore it. Recording cannot be done, because the memory card is defective. Because playback may be possible, it is recommended to replace it with another card after copying the clips, as required. Neither recording nor playback can be done, because the memory card is defective. It cannot be operated with this camcorder. Replace it with another card. This is an advanced notice that the camcorder will switch from the current memory card to the other memory card for continuous recording. A card of a different file system or an unformatted card was inserted. It cannot be used with this camcorder. Replace it or format it with this camcorder. An error occurred in reading data from the memory card, and playback cannot be continued. If this frequently occurs, change the memory card after copying the clips, as required. Recording cannot be done, because an error occurred with the memory card. If this frequently occurs, change the memory card. The memory card comes to the end of its service life. Make a backup copy and replace the card with another one as soon as possible. Recording/playback may not be performed properly if you continue to use the card. For details, refer to the operating instructions of the memory card. A memory card with different file system is inserted. Replace the card, format it with the camcorder. Flashing The temperature of the battery pack is rising. Turn off the power and replace the battery pack with another one or wait until the temperature falls. * "Media(B)" for the card in slot B. Appendices 62 Error/Warning Indications