Sony HDR HC1 Operating Instructions - Page 28
To record in mirror mode, To use the flash, To use a tripod, Playback, To use PB zoom
UPC - 027242681330
View all Sony HDR HC1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Functions used for recording/playback, etc. (Continued) To record in mirror mode Open the LCD panel 90 degrees to the camcorder (), then rotate it 180 degrees to the lens side (). • A mirror-image of the subject appears on the LCD screen, but the picture will be normal 28 when recorded. To use the flash Press (flash) repeatedly to select a setting. No indicator displayed: Automatically flashes when there is insufficient ambient light. (Forced flash): Always uses the flash regardless of the surrounding brightness. (No flash): Records without flash. • The recommended distance to the subject when using the built-in flash is 0.5 to 2.5 m (1 5/8 to 8 ft.). • Remove any dust from the surface of the flash lamp before using it. Flash effect may be impaired if heat discoloration or dust obscures the lamp. • The flash charge lamp flickers when charging the flash, and remains lit when the battery charge is complete. • You can only use the flash in the CAMERAMEMORY mode. • If you use the flash in bright places such as when shooting a backlit subject, the flash may not be effective. • You can change the brightness of the flash by setting [FLASH LEVEL], or you can prevent the redeye by setting [REDEYE REDUC], in [FLASH SET] (p. 46). To use a tripod Attach the tripod (optional: the length of the screw must be less than 5.5 mm (7/32 in.) to the tripod receptacle using a tripod screw. Playback To use PB zoom You can magnify still pictures on the "Memory Stick Duo" from about 1.5 to 5 times the original size. Magnification can be adjusted with the power zoom lever or the zoom buttons on the LCD frame. Play back the picture you want to magnify.