Sony HDR HC1 Operating Instructions - Page 54
DEMO MODE, PictBridge PRINT, INT.REC-STL, Interval photo recording, SHOT TRANS
UPC - 027242681330
View all Sony HDR HC1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
PICT.APPLI. menu (Continued) INT.REC-STL (Interval photo recording) You can record still images on the "Memory Stick Duo" at a selected interval. This function is useful to observe the movement of clouds or the changes in daylight, etc. [a]: Recording [b]: Interval Touch a desired interval time (1, 5 or 10 minutes) [ON] . Press PHOTO fully. stops flashing and the interval still image recording starts. To cancel [INT.REC-STL], select [OFF] in step . SHOT TRANS You can register the settings of focus and zoom and then change the recording setting from the current one to the registered one, resulting in a smooth transition of scenes (Shot transition). SHOT A SHOT B STORE Set the zoom (p. 26) and focus (p. 27) at the desirable setting and press [STOREA]. [SHOT-A] flashes and will be registered. Register [STORE-B] as well. EXEC Touch [NEXT][EXEC-A] or [EXEC- 54 B] and the recording setting changes to the registered one. Touch [BACK] to register again or touch [END] to finish the operation. • You cannot register the setting while recording. • It takes about 4 seconds to change to the registered setting. • If you register [SHOT TRANS], the [WHITE BAL.] setting is also registered at the same time. • The recording angle varies during [SHOT TRANS]. • Use the tripod because [STEADYSHOT] does not function. DEMO MODE The default setting is [ON], allowing you to view the demonstration in about 10 minutes, after you have removed both a cassette and a "Memory Stick Duo" from your camcorder, and slide the POWER switch down to turn on the CAMERATAPE lamp. • The demonstration will be suspended in situations such as those described below. - When you touch the screen during the demonstration. (The demonstration starts again in about 10 minutes.) - When a cassette or a "Memory Stick Duo" is inserted. - When the POWER switch is set to other than CAMERA-TAPE. PictBridge PRINT See page 70.