Sony HDR HC1 Operating Instructions - Page 98
Memory Stick Duo, PictBridge compliant printer, Warning indicators and messages Continued - reinsert tape error
UPC - 027242681330
View all Sony HDR HC1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Warning indicators and messages (Continued) The tape is locked - check the tab (p. 101). The tape has reached the end. • Rewind or change the tape. "Memory Stick Duo" Insert a Memory Stick (p. 22). Reinsert the Memory Stick. • Reinsert the "Memory Stick Duo" a few times. If even then the indicator flashes, the "Memory Stick Duo" might be damaged. Try with another "Memory Stick Duo." This is a read-only Memory Stick. • Insert a writable "Memory Stick Duo." Incompatible type of Memory Stick. • A type of "Memory Stick Duo" incompatible with your camcorder is inserted (p. 103). This Memory Stick is not formatted correctly. • Check the format, then format the "Memory Stick Duo" as necessary (p. 51, 103). Cannot record. The Memory Stick is full. • Delete unnecessary images (p. 69). The Memory Stick is locked. Check the tab (p. 103). Cannot playback. Reinsert the 98 Memory Stick (p. 22). Cannot record. Reinsert the Memory Stick (p. 22). No file. • No file is recorded or there is no readable file on the "Memory Stick Duo." Memory Stick folders are full. • You cannot create folders exceeding 999MSDCF. You cannot delete created folders using your camcorder. • You will have to format the "Memory Stick Duo" (p. 51), or delete them using your computer. Cannot record still images on Memory Stick (p. 85). PictBridge compliant printer Check the connected device. • Switch off the printer and switch it on again, then disconnect the USB cable (supplied) and reconnect it. Connect the camcorder to a PictBridge compatible printer. • Switch off the printer and switch it on again, then disconnect the USB cable (supplied) and reconnect it. Error. Cancel the task. • Check the printer. Cannot print. Check the printer. • Switch off the printer and switch it on again, then disconnect the USB cable (supplied) and reconnect it.