Sony HDR HC1 Operating Instructions - Page 60
REMAINING, REMOTE CTRL Remote control, REC LAMP Recording lamp, GUIDEFRAME, COLOR BAR, DATA CODE
UPC - 027242681330
View all Sony HDR HC1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
STANDARD SET menu (Continued) - [TV TYPE] (p. 59) - [VCR HDV/DV] (when setting the POWER switch to PLAY/EDIT) (p. 56) GUIDEFRAME You can display the frame and check that the subject is horizontal or vertical by setting [GUIDEFRAME] to [ON]. The frame is not recorded. Press DISPLAY/ BATT INFO to make the frame disappear. • Pointing the subject at the cross point of the guide frame makes a balanced composition. COLOR BAR You can display the color bar or record it on the tape by setting [COLOR BAR] to [ON]. It is convenient to adjust the color on the monitor connected. DATA CODE During playback, displays the information recorded automatically (data code) during recording. OFF Data code is not displayed. DATE/TIME Displays the date and time. CAMERA DATA (below) Displays camera setting data. 6 0 min 1 0 : 0 0 : 0 0 : 0 0 2 AUTO 100 AWB F1. 8 9 dB 3 6 54 SteadyShot off* Exposure* White balance* Gain* Shutter speed Aperture value 60 * Appears only during tape playback. • The exposure adjustment value (0EV), a shutter speed, and the aperture value appear when still images on a "Memory Stick Duo" are played back. • appears for a picture recorded using a flash. • In the DATE/TIME data display, the date and time are displayed in the same area. If you record a picture without setting the clock and [--:--:--] will appear. REMAINING AUTO Displays the remaining tape indicator for about 8 seconds in situations such as those described below. • When you set the POWER switch to PLAY/ EDIT or CAMERA-TAPE with a cassette inserted. • When you touch (Play/Pause). ON Always displays the remaining tape indicator. REMOTE CTRL (Remote control) The default setting is [ON], allowing you to use the Remote Commander (p. 34). • Set to [OFF] to prevent your camcorder from responding to a command sent by another VCR remote control unit. REC LAMP (Recording lamp) The camera recording lamp will not light up during recording when you set this to [OFF]. (The default setting is [ON].) BEEP ON A melody sounds when you start/stop recording, or operate the touch panel. OFF Cancels the melody.