Sony HDR HC1 Operating Instructions - Page 66
Dubbing to another device, Dubbing to another device such as a VCR, DVD recorder, etc. Continued
UPC - 027242681330
View all Sony HDR HC1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Dubbing to another device such as a VCR, DVD recorder, etc. (Continued) Dubbing to another device 1 Connect your VCR to your camcorder as a recording device. See page 64 for connection details. • Set [DISP OUTPUT] to [LCD PANEL] (default setting) when connecting with an A/V connecting cable (supplied) (p. 61). 2 Prepare your VCR for recording. When dubbing to the VCR, insert a cassette for recording. When dubbing to the DVD recorder, insert a DVD for recording. If your recording device has an input selector, set it to the appropriate input (such as video input1, video input2, etc.). 3 Prepare your camcorder for playback. Insert the recorded cassette. Slide the POWER switch down to turn. on the PLAY/EDIT lamp. Set [TV TYPE] according to the playback device (TV, etc.) (p. 59). 4 Start the playback on your camcorder, and record it on the VCR. Refer to the operating instructions supplied with your recording device for details. 5 When the dubbing is finished, stop your camcorder and the VCR. 66 • The following cannot be output via the HDV/DV interface (i.LINK) jack: - Indicators - Pictures edited with [PICT. EFFECT] (p. 53) or [D. EFFECT] (p. 52). - Titles that are recorded on other camcorder. • To record the date/time and camera settings data when connected by the A/V connecting cable (supplied), display them on the screen (p. 60). • Pictures recorded in the HDV format are not output from the HDV/DV Interface (i.LINK) jack during playback pause or in playback modes other than normal playback. • Note the following when connecting with an i.LINK cable (optional): - The recorded picture becomes rough when a picture is paused on your camcorder while recording to a VCR. - Data code (date/time/camera settings data) may not be displayed or recorded depending on the device or application. - You cannot record the picture and sound separately. • When you use an i.LINK cable (optional), the video and sound signals are transmitted digitally, producing high quality pictures. • When i.LINK cable (optional) is connected, the format of the output signal ( or )will be indicated on the LCD screen of your camcorder.