Sony HT-RT3 Operating Instructions - Page 17
Settings and Adjustments, Using the setup display, Menu list - sound bar
View all Sony HT-RT3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Settings and Adjustments Settings and Adjustments Using the setup display You can set the following items with the menu. Your settings are retained even if you disconnect the AC power cord (mains lead). 1 Press MENU to turn on the menu in the front panel display. 2 Press BACK///ENTER repeatedly to select the item and press ENTER to select the setting you want. 3 Press MENU to turn off the menu. Menu list The default settings are underlined. Menu items "LVL >" (Level) "SPK >" (Speaker) Function "SUR.L"/"SUR.R" "0.0 dB": Adjusts the sound level of the Surround (Surround left/right Speakers from -6.0 dB to +6.0 dB (0.5 dB interval). speaker level) Note Be sure to set "TTONE" to "ON" for easy adjustment. "ATT" (Attenuation settings - Analog) Distortion may occur when you listen to a device connected to the ANALOG IN jack. You can prevent distortion by attenuating the input level on the system. "ON": Attenuates the input level. The output level will decrease at this setting. "OFF": Normal input level. "DRC" (Dynamic range control) "TTONE" (Test tone) "PLACE" (Speaker placement) Useful for enjoying movies at low sound volume. DRC applies to Dolby Digital sources. "ON": Compresses sound in accordance with the information contained in the content. "OFF": Sound is not compressed. "ON": The test tone is output from each speaker in sequence. "OFF": Turns off the test tone. "STDRD": Select this setting if you install the Bar Speaker and the Surround Speakers in standard position. "FRONT": Select this setting if you install the Bar Speaker and the Surround Speakers in front. "SUR.L"/"SUR.R" "3.0 M": Adjusts the distance from the seating position to (Surround left/right the Surround Speakers from 1.0 meter (3.3 feet) to speaker distance) 6.0 meters (19.7 feet). 17US