Sony HT-RT3 Operating Instructions - Page 28
Remote control, Others, Enable the Control for HDMI
View all Sony HT-RT3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Increase the volume on the connected BLUETOOTH device. The sound is not in sync with the image. When you are watching movies, you may hear the sound with a slight delay from the image. Remote control The remote control does not function. Point the remote control to the remote control sensor on the Subwoofer (pages 8, 23). Remove any obstacles in the path between the remote control and the Subwoofer. Replace both batteries in the remote control with new ones, if they are weak. Make sure you are pressing the correct button on the remote control. The TV remote control does not work. Install the system so that it does not obstruct the remote control sensor of the TV. Others The Control for HDMI function does not work properly. Check the connection with the system (refer to the supplied Startup Guide). Enable the Control for HDMI function on the TV. For details, refer to the operating instructions of your TV. Wait a while, and then try again. If you unplug the system, it will take a while before operations can be made. Wait for 15 seconds or longer, and then try again. Make sure the devices connected to the system support the Control for HDMI function. Enable the Control for HDMI function on the devices connected to the system. For details, refer to the operating instructions of your device. The type and number of devices that can be controlled by the Control for HDMI function is restricted by the HDMI CEC standard as follows: Recording devices (Blu-ray Disc recorder, DVD recorder, etc.): up to 3 devices Playback devices (Blu-ray Disc Player, DVD player, etc.): up to 3 devices Tuner-related devices: up to 4 devices Audio system (receiver/ headphone): up to 1 device (used by this system) If "PRTCT" appears in the front panel display of the Subwoofer. Press to turn off the system. After the display turns off, disconnect the AC power cord (mains lead) then check that nothing is blocking the ventilation holes of the Subwoofer. The front panel display of the Subwoofer is not lit. Press DIMMER to set the brightness to "BRIGHT" or "DARK", if set to "OFF" (page 10). 28US