Sony KF-60DX100 Operating Instructions - Page 78
until you come to the correct code for your component., If more than one code number is listed
View all Sony KF-60DX100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Other Information To program video equipment 1 Open the panel of the remote control. 2 Move the slide switch to the desired component type. 3 Press CODE SET inside the panel. ✍ You must perform step 4 within 10 seconds of step 3, or you must start again from step 3. 4 Close the panel and enter the three-digit manufacturer's code number using the 0-9 buttons. 5 Press ENTER. 6 To check if the code number works, aim the LCD projection TV's remote control at the component, open the panel, and press the green POWER button. If it responds, the programming is completed. If not, try using the other codes listed for that manufacturer. Tips ❑ If more than one code number is listed, try entering them one by one until you come to the correct code for your component. ❑ If you enter a new code number, the code number you previously entered at that setting is erased. ❑ In some rare cases, you may not be able to operate your component with the Sony remote control. In this case, use the component's own remote control unit. 78