Sony KF-60DX100 Operating Instructions - Page 83

Other Information Other Information Problem Possible Remedies Dotted lines or stripes ❏ Adjust the antenna. ❏ Move the LCD projection TV away from noise sources such as cars, neon signs, or hair-dryers. LCD projection TV is fixed to ❏ Use Auto Program in the Channel menu to add receivable channels that are not one channel presently in TV memory (see page 63). ❏ Check your Channel Fix settings (see page 63). Double images, ghosts, or merged colors ❏ Use a highly directional outdoor antenna or a cable (when the problem is caused by reflections from nearby mountains or tall buildings). ❏ Set the Image Revision to an appropriate value. The default setting is Auto. If ghosts, doubled images, or merged colors appear with Auto, select the best value from 0 to 3 (see page 68). Cannot operate menu ❏ If the item you want to choose appears in gray, you cannot select it. ❏ Turn the LCD projection TV's power off and on again. Cannot receive any channels when using cable TV ❏ Use Auto Program in the Channel menu to add receivable channels that are not presently in TV memory (see page 63). ❏ Check your cable settings. ❏ Make sure Cable is set to ON in the Channel menu (see page 62). Cannot gain enough volume ❏ Increase the volume of the cable box using the cable box's remote control. Then when using a cable box press TV (FUNCTION) and adjust the LCD projection TV's volume. Channel Index does not display ❏ Make sure Cable is set to ON in the Channel menu (see "Cable" on page 62). all available channels ❏ Use Auto Program in the Channel menu to add receivable TV channels that are not presently in TV memory (see page 63). Cannot receive channels Unable to select a channel ❏ Use Auto Program in the Channel menu to add receivable TV channels that are not presently in TV memory (see page 63). Lost password ❏ In the password screen (see page 69), enter the following master password: 4357. The master password clears your previous password; it cannot be used to temporarily unblock channels. Cannot change channels with ❏ Be sure you have not inadvertently switched your LCD projection TV from the remote control channel 3 or 4 setting if you are using another device to change channels. ❏ If you are using another device to control channels, be sure the "function" button for that device has been pressed, or the slide switch is set correctly. For example, if you are using your cable to control channels, be sure to press SAT/CABLE. Cannot cycle through the other ❏ Be sure the Video Label feature has not been set to Skip (see page 68). video equipment connected to the LCD projection TV There is a black box on the screen ❏ You have selected a text option in the Setup menu and no text is available. (see page 67 to reset Setup selections) To turn this feature off, select OFF in the Caption Vision option. If you were trying to get closed captioning, select CC1 instead of Text 1-4. (Continued) 83