Sony KF-60DX100 Operating Instructions - Page 84

Other Information Problem Possible Remedies There is no twin picture or it is ❏ just static ❏ ❏ Be sure your twin picture is set to a video source/channel that has a program airing. You may be tuned to a video input with nothing connected to it. Try cycling through your video inputs using TV/VIDEO. Twin View is not set to receive a signal from the AUX input. If you have connected a VCR, DVD player or satellite receiver to the AUX input on the LCD projection TV, it will not show in the second picture. You get the same program in the ❏ window picture as in the main picture ❏ Both may be set to the same channel. Try changing channels in either the main picture or the window picture. You may be running all your channels through a cable box. The cable box will only unscramble one signal at a time, so you cannot use the Twin View feature. If possible, run a direct cable to your LCD projection TV's VHF/UHF input (this will only work if your cable system provides an unscrambled signal.) You cannot get anything but TV ❏ Be sure the video label has not been set to skip your video inputs. See the Setup channels in your second picture menu on page 68. Favorite Channel does not display your choices ❏ Verify that Favorite Channel is set to Manual in the Channel menu (see "Favorite Channel" on page 62). Some video sources do not appear when you press TV/ VIDEO ❏ Ensure that Video Label is not set to "Skip" (see "Video Label" on page 68). 84