Sony MZ-NF810CK Operating Instructions - Page 18

Getting started, Insert the rechargeable battery

Page 18 highlights

Getting started Charge the rechargeable battery before using. Even if the rechargeable battery is not charged, you can use the recorder as long as the AC power adaptor is connected. 1 Insert the rechargeable battery Slide OPEN to open the battery compartment lid. Insert the NH-10WM rechargeable Close the lid. battery minus end first. E e 2 Charge the rechargeable battery. 1 Connect the AC power adaptor to the battery charging stand and the AC adaptor to a wall outlet. 2 Place the recorder on the battery charging stand. To a wall outlet Battery charging stand (at the bottom) AC power adaptor To DC IN 3V 18 Attach the connector to the jack firmly. "Charging" flashes, e appears in the display, and charging starts. When charging is completed, the battery indication disappears. Full charging of a completely discharged rechargeable battery takes about 2.5 hours. 3 Remove the recorder from the battery charging stand.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128

18
Getting started
Charge the rechargeable battery before using. Even if the rechargeable
battery is not charged, you can use the recorder as long as the AC
power adaptor is connected.
1
Insert the rechargeable battery
2
Charge the rechargeable battery.
1
Connect the AC power adaptor to the
battery charging stand and the AC
adaptor to a wall outlet.
2
Place the recorder on the battery
charging stand.
“Charging” flashes,
e
appears in the
display, and charging starts. When
charging is completed, the battery
indication disappears.
Full charging of a completely
discharged rechargeable battery takes
about 2.5 hours.
3
Remove the recorder from the battery
charging stand.
e
E
Insert the NH-10WM rechargeable
battery minus end first.
Close the lid.
Slide OPEN to open the
battery compartment lid.
AC power
adaptor
To DC IN 3V
To a wall outlet
Battery charging stand
(at the bottom)
Attach the connector to the jack firmly.