Sony MZ-NF810CK Operating Instructions - Page 45
Press ENTER
View all Sony MZ-NF810CK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
4 Press . or > repeatedly until the following item appears in the display, and then press ENTER. When labeling a track " : Name" When labeling a " disc : Name" The cursor flashes in the letter input area and the track, group, or disc is ready to be labeled. The cursor flashes. 5 Press VOL + or - to select a letter and press ENTER. The selected letter appears and the cursor moves to the next input position. The buttons used for character input and their functions are listed below. Functions Operations To select a character Press VOL + or -. To enter a letter To enter a name To insert a blank space before the cursor Press ENTER. Press ENTER for 2 seconds or more. Press END SEARCH and press VOL + at the same time. To delete a letter To switch capital and small letters. To cancel labeling. Press END SEARCH and press VOL - at the same time. Press X. Press x or MENU. 6 Repeat step 5, and then enter all characters of the label name. 7 Press ENTER for 2 seconds or more. A track or disc is labeled. To return the preceding setting Press x. To cancel labeling Press x for 2 seconds or more. Note When the recording is stopped while labeling a track or a disc during recording, or when the recording moves on to the next track while labeling a track, the input at that point is entered automatically. Re-labeling recordings Follow the procedure of the "Labeling" (page 44) to relabel a name. Note The recorder cannot rewrite a disc or track name of more than 200 letters that was created by another device. For the remote control operations, see page 66. 45