Sony MZ-NF810CK Operating Instructions - Page 47

Dividing a track (Divide) You can divide a track with a track mark, creating a new track from the part following the track mark. You can also make fine adjustments to the track mark position before making the actual division. This function can be set with the recorder only. Note You cannot add a track mark on a track that has been checked-out from your computer. The track numbers will increase as follows: 1 2 34 Track marking 12345 Track numbers increase 5-way control key (., >, ENTER) T MARK Adjusting a dividing point before dividing a track (Divide Rehearsal) 1 When finding the point you want to add the track mark, press and hold T MARK for 2 seconds or more. The playback of up to 4 seconds forward in the track from the point T MARK is pressed will be repeated. At the point T MARK is pressed. The playback repeats up to 4 seconds forward in the track. 2 Press . or > to adjust the point to divide. Pressing . or > shifts the dividing point rewind or forward. The dividing point can be shifted the maximum 8 seconds rewind or forward from the point the T MARK was pressed for the first time. At the point T MARK is pressed in step 1. The dividing point shifts the maximum 8 seconds forward or behind. Dividing a track directly 1 While playing or pausing an MD, press T MARK on the recorder at the point you want to mark. "MARK ON" appears in the display, and a track mark is added. The track number will increase by one. The playback repeats up to 4 seconds forward in the track from the dividing point is shifted. 3 Press ENTER. 47