Sony PEG-UX40 Troubleshooting Q&A - Page 14

My CLIÉ handheld does not respond B The POWER/HOLD switch of your CLIÉ handheld is in HOLD mode. Your CLIÉ handheld does not operate when the POWER/HOLD switch is in HOLD mode. Make sure you release HOLD mode. B The CLIÉ handheld is placed near the IR port of your computer. Move your CLIÉ handheld away from the IR port of your computer except when performing the IR HotSync® operation, as a malfunction may occur. You can also disable the IR feature by selecting [Off] next to [Beam Receive:] in [General] of Preferences. B Perform a soft reset by pressing the RESET button. b For details, refer to "Basic operations of your CLIÉ™ handheld: Restarting your CLIÉ™ handheld" in the supplied "Read This First (Operating Instructions)". My CLIÉ handheld keeps turning itself off B Your CLIÉ handheld is designed to turn itself off after a period of inactivity (Automatic power-off). You can set the automatic power-off time by selecting [Auto-off After:] in [General] of Preferences. b For details, refer to "Customizing your CLIÉ™ handheld (Preferences): Setting the automatic power-off time" in the supplied "Handbook". B Did you set [After a preset delay] from [Auto Lock Handheld:] in Security? It you set [After a preset delay] from [Auto Lock Handheld:], your CLIÉ handheld may turn off after a shorter period even if you set the automatic power-off time. b For details, refer to "Protecting your data with a password: Locking your CLIÉ handheld with a password (Data protection)" in the supplied "Handbook". My CLIÉ handheld does not produce any sounds B Tap [General] of Preferences and check that [System Sound:] is not set to [Off]. b For details, refer to "Customizing your CLIÉ™ handheld (Preferences): Setting sounds" in the supplied "Handbook". 14