Sony PEG-UX40 Troubleshooting Q&A - Page 27
I cannot perform the IR HotSync, operation, If you are using Windows 98 Second Edition/Windows Me
View all Sony PEG-UX40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Troubleshooting I cannot perform the IR HotSync® operation B If you are using Windows 2000 Professional/Windows XP, click (HotSync) in the task tray at the bottom right of your computer window and ensure [InfraRed] is selected. B If you are using Windows 98 Second Edition/Windows Me, click (HotSync) in the task tray at the bottom right of your computer window and ensure [Local Serial] is selected. B If you are using Windows 98 Second Edition/Windows Me, click (HotSync) in the task tray at the bottom right of your computer window and click [Local] in the Setup window. Then ensure [Serial Port] of the simulated port for IR communication is selected. B Ensure [Local] and [IR to a PC/handheld] are selected in the HotSync screen on your CLIÉ handheld. B Point the IR port of your CLIÉ handheld directly to the IR port of your computer. The distance between the IR ports of your CLIÉ handheld and your computer, should be 4 to 8 inches (approximately 10 to 20 centimeters). The optimum distance for beaming may vary depending on devices. B You cannot perform the IR HotSync® operation if the remaining battery power is inadequate. After charging the battery of your CLIÉ handheld, try the IR HotSync® operation again. B Reduce the transmission speed. Tap [IR to a PC/Handheld] in [Connection] of Preferences. Then tap [Edit...], [Details...] and specify [Speed:] in the Details screen. Continued on next page 27