Sony RM-AV2100 Operating Instructions (primary manual) - Page 21
Component Select button., While pressing COMMANDER
UPC - 027242612044
View all Sony RM-AV2100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
To clear all signals learned for a specific component 3 Press COMMANDER OFF. Note For DECK B/A, be sure to display the deck that has a learned signal ("DECK A" or "DECK B") before you perform the steps above. If you reset the wrong deck, the component codes for both A and B will be reset to the factory settings (page 8). 1 While pressing COMMANDER OFF, press the corresponding Component Select button. When you want to clear signals learned for DECK B/A Press DECKB/A to display "DECK A"or "DECK B". You can not clear both decks at the same time. 2 While pressing the RESET key, press that Component Select button again. The learned contents are cleared. The keys for the component return to their original states before learning. 21
21
To clear all signals learned for a
specific component
1
While pressing COMMANDER
OFF, press the corresponding
Component Select button.
When you want to clear signals
learned for DECK B/A
Press DECKB/A to display “DECK A”or
“DECK B”. You can not clear both decks at
the same time.
2
While pressing the RESET key,
press that Component Select
button again.
The learned contents are cleared. The
keys for the component return to their
original states before learning.
3
Press COMMANDER OFF.
Note
For DECK B/A, be sure to display the deck
that has a learned signal (“DECK A” or “DECK
B”) before you perform the steps above. If you
reset the wrong deck, the component codes for
both A and B will be reset to the factory
settings (page 8).