Sony RM-AV2100 Operating Instructions (primary manual) - Page 31
Adding an Extra Function to the Component Select Buttons
UPC - 027242612044
View all Sony RM-AV2100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Adding an Extra Function to the Component Select Buttons Programming the Power-On command of the selected component (for Sony components only) When using Sony components, you can program the Power-on signal for each component on a Component Select button. You can select the desired component and power it on by just pressing that Component Select button. Example: To program the TV button 1 While pressing COMMANDER OFF, press VOLUME - and the desired Component Select button. When the Power-on command is programmed, you will hear a beep and "POWER ON" appears on the display. (The display goes off when you release the buttons.) To clear the Power-on command Repeat the procedure above. The following display appears. Continued 31
31
Example:
To program the TV
button
1
While pressing COMMANDER
OFF, press VOLUME – and the
desired Component Select
button.
When the Power-on command is
programmed, you will hear a beep
and “POWER ON” appears on the
display. (The display goes off when
you release the buttons.)
To clear the Power-on command
Repeat the procedure above.
The following display appears.
Adding an Extra
Function to the
Component Select
Buttons
Programming the Power-On
command of the selected
component (for Sony
components only)
When using Sony components, you can
program the Power-on signal for each
component on a Component Select
button. You can select the desired
component and power it on by just
pressing that Component Select button.
Continued