Sony RM-AV2100 Operating Instructions (primary manual) - Page 36
function, follow the Steps 1 to 6, OFF, press CHANNEL-
UPC - 027242612044
View all Sony RM-AV2100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Assigning Other Components to the Component Select Buttons (continued) Example: To assign a CD player to the VCR3 button 1 While pressing COMMANDER OFF, press CHANNEL- and VCR3. 3 Press the ENTER key. "VCR3" (the original component), "CD" (the new component) and "ENTER" appear twice. The number 0 - 9, "A", "B" and "ENTER" flash. 2 Press one of the following keys to select a new component to assign. In this example, press the 5 key to select CD. 1: VCR 2: VD 3: SAT 4: AMP 5: CD 6: DECK 7: MD 8: TV 9: CBL 0: DVD A: TUNER B: DSP 4 •If the newly assigned component is a Sony component, press COMMANDER OFF to finish this procedure. •If you need to set the component code, follow the steps on pages 8 and 9. •If you need to program some signals by the "learning" function, follow the Steps 1 to 6 on pages 16 and 17. Note If "NG" flashes on the display when you press the Component Select button at Step 1, you can not assign another component because some of the keys or buttons are already programmed with the learning function (see page 32). Try the above procedure again after clearing the learned signals for that component. 36