Sony RM-AV2100 Operating Instructions (primary manual) - Page 28
Programming a series of commands to the Component Select buttons, While pressing COMMANDER, OFF
UPC - 027242612044
View all Sony RM-AV2100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Executing a Series of Commands - System Control Functions (continued) Programming a series of commands to the Component Select buttons As with the SYSTEM CONTROL buttons, you can also program a series of operating commands for the Component Select buttons (up to 16 steps). To execute the commands programmed on a Component Select button by the System Control function, press the button for more than 2 seconds. Notes • The programmed commands are executed when you press a Component Select button for more than 2 seconds. When you press the button for less than 2 seconds, it works as the normal Component Select button, and the corresponding touch-keys are displayed. • See also "Tips for programming the System Control functions" on page 25 and "Notes on System Control Operations" on page 27. Example: To program the procedure on page 23 for the VCR3 button 1 While pressing COMMANDER OFF, press VOLUME+ and VCR3. All the component names flash. If a series of commands is already programmed for that button The programmed operations are displayed in order. To program a new series of operations, clear the program first (page 29). 2 Follow Steps 2 to 5 on pages 24 and 25. 28