Sony RM-AV2100 Operating Instructions (primary manual) - Page 24
Programming a series of commands to the SYSTEM CONTROL buttons
UPC - 027242612044
View all Sony RM-AV2100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Executing a Series of Commands - System Control Functions (continued) Programming a series of commands to the SYSTEM CONTROL buttons If a series of commands is already programmed for that button That program will be displayed. (At the factory, the SYSTEM CONTROL 1 button is preset with the System Power-Off function for Sony components (the same function as explained in page 34), and the SYSTEM CONTROL 3 button is factory preset with standard poweron command for nearly all Sony components.) To program a new series of operations, clear the program first (see page 26). 2 Press the Component Select buttton for the component to operate. Example: To program the procedure above to the SYSTEM CONTROL 2 button 1 While pressing COMMANDER OFF, press one of the SYSTEM CONTROL buttons (in this case, SYSTEM CONTROL 2). All the component names flash. The keys for the selected component flash. If the component has the poweron and power-off signals Both the OFF and ON keys are displayed and you can select either of them to program. It is useful to set the exact command for power-on or power-off and operate the component regardless of its status (on/off). 24