Sony RM-AV2100 Operating Instructions (primary manual) - Page 37

To use the Commander after assigning other components Press the reassigned Component Select button. The keys of the new component are displayed and you can use the desired component. Note however that only the original component name is displayed. (In this example, the display would be like the one below.) Original component name Copying the settings of a Component Select button to another button You can copy the entire settings of a Component Select button to another Component Select button. The settings of the component code (page 8), the channel macro function (page 45), and the learned functions (page 16) are copied to a new button. Note You cannot copy the settings to a Component Select button for which any learning function or channel macro function has been programmed. ("NG" flashes.) Keys for operating a CD player To reset a Component Select button to its original setting 1 While pressing COMMANDER OFF, press the Component Select button which you want to reset. 2 While pressing the RESET key, press that Component Select button again. The setting for that Component Select button returns to the factory setting. 3 Press COMMANDER OFF. Note If you have programmed some signals on any of the keys or buttons with the learning function (see page 16) after you reassigned your component, the two steps above only clears the "learned" signals. In this case, perform Step 2 again to reset to the original Component Select button. Continued 37