Sony SLT-A58 α Handbook - Page 184

Print Print (Advanced Operations) Specifying DPOF Using the camera, you can specify still images before printing them at a shop or with your printer. Follow the procedure below. DPOF specifications are left with images after printing. It is recommended that you unspecify them after printing. 1 MENU button t 1 t [Specify Printing] t [DPOF Setup] t [Multiple Img.] t [Enter] 2 Select the image using b/B on the control button. 3 Press the center of the control button to add a mark. • To unspecify DPOF, select the image again, then press the center of the control button. 4 Press the MENU button. 5 Select [OK] using v, then press the center of the control button. Notes • You cannot specify DPOF on RAW data files. • You cannot specify the number of images to be printed. Date Imprint You can add the date to images when printing them. The position of the date (inside or outside the image, character size, etc.) depends on your printer. MENU button t 1 t [Specify Printing] t [Date Imprint] t [On] Notes • This function may not be available, depending on the printer. 184