Home » Sony Manuals » Audio Components » Sony STR-DA5600ES » Manual Viewer

Sony STR-DA5600ES Operating Instructions (Large File - 18.8 MB) - Page 107

Enjoying the sound/images from other inputs (Input Assign), Input Assign

Add to My Manuals
Save this manual to your list of manuals

Page 107 highlights

compatible with the Audio Return Channel (ARC) function, the digital optical audio signals are selected. • OPT Appears only when TV input is selected, and specifies the digital optical audio signals input to the TV OPTICAL IN jack. • ANALOG Specifies the analog audio signals input to the AUDIO IN (L/R) jacks. Notes • Some audio input modes may not be set up depending on the input. • When either the HDMI input, DIGITAL MEDIA PORT adapter, Server, Rhapsody, SHOUTcast, or SIRIUS is selected, "------" appears on the display, and you cannot select other modes. Select an input other than the HDMI input, DIGITAL MEDIA PORT adapter, Server, Rhapsody, SHOUTcast, or SIRIUS then set the audio input mode. • When "2ch Analog Direct" is being used, or the multi-channel input is selected, audio input is set to "Analog." You cannot select other modes. • The Audio Return Channel (ARC) function does not work in the following cases. - Your TV is not compatible with the Audio Return Channel (ARC) function. - "Control for HDMI" is set to "OFF." - When you do not connect the receiver to the ARC compatible TV's HDMI jack via an HDMI cable. Enjoying the sound/ images from other inputs (Input Assign) You can reassign video and/or audio signals to another input. Example) Connect the OPTICAL OUT jack of the DVD player to the OPTICAL VIDEO 1 IN jack of this receiver when you want to input the only digital optical audio signals from the DVD player. Connect the component video jack of the DVD player to the COMPONENT VIDEO IN 1/ COMPONENT VIDEO IN 2, or COMPONENT VIDEO IN 3 jack of this receiver when you want to input the video signals from the DVD player. Assign video and/or audio signals to the DVD input jack using "Input Assign" in the Input menu. V/v/B/b, OPTIONS MENU 1 Select " Input" from the menu, then press or b. 2 Select the input name you want to assign. 3 Press OPTIONS. The option menu appears. 4 Select "Input Assign," then press . 5 Select the audio and/or video signals you want to assign to the input selected in step 2, then press . Using Other Features continued 107GB

Section	Page
Table of Contents	6
Description and location of parts	8
Getting Started	20
Checking the connection appropriate for your components	20
1: Installing speakers	21
2: Connecting the monitor	25
3: Connecting the video components	26
4: Connecting the audio components	35
5: Connecting the IR Blaster	39
6: Connecting the antennas (aerials)	40
7: Connecting to the network	41
8: Preparing the receiver and the remote	43
9: Setting the speakers	44
10: Calibrating the appropriate speaker settings automatically (Auto Calibration)	47
11: Configuring the network settings of the receiver	53
12: Preparing a computer to use as a server	53
Guide to on-screen display operation	55
Playback	58
Enjoying sound/images from the component connected to the receiver	58
Enjoying sound/images from the components connected to the DIGITAL MEDIA PORT	60
Operating the TDM-iP50 using the GUI menu of the receiver	61
Tuning	64
Listening to FM/AM radio	64
Presetting FM/AM radio stations	66
Listening to satellite radio (USA/Canadian model only)	67
Connecting a satellite radio tuner	68
Preparing to listen to a satellite radio	68
Selecting a channel of the satellite radio	69
Presetting satellite radio channels	70
Restricting access to specific channels (Parental Lock)	71
Enjoying Surround Sound	74
Playing back with 2-channel sound	74
Playing back with multi-channel surround	75
Enjoying a surround effect for music	76
Enjoying a surround effect for movies	78
Using Network Features	81
About the network functions of the receiver	81
Enjoying content stored on the server	82
Enjoying the audio of a component connected to the receiver using other device via the home network	85
Using a controller	87
Listening to Rhapsody	88
Listening to SHOUTcast	91
Features of the Setup Manager application software	92
Using Multi-zone Features	94
What you can do with the Multi-zone function	94
Making a multi-zone connection	94
Setting the speakers in zone 2	98
Switching the zone setting of the remote	99
Operating the receiver from another zone (ZONE 2/ZONE 3 operations)	99
Using Other Features	102
Using “BRAVIA” Sync features	102
Switching the monitors that output the HDMI video signals	105
Outputting the HDMI signals even when the receiver is in standby mode (Pass Through)	105
Switching between digital and analog audio	106
Enjoying the sound/images from other inputs (Input Assign)	107
Using the sleep timer	109
Enjoying the surround effect at low volume levels (Night Mode)	109
Recording using the receiver	110
Switching the command mode of the receiver and the remote	111
Using a bi-amplifier connection	112
Adjusting Settings	114
Using the setting menu	114
Auto Calibration	115
Speaker settings	118
Surround settings	122
EQ settings	123
Multi Zone settings	124
Audio settings	125
Video settings	127
HDMI settings	129
Network settings	131
Quick Click settings	133
System settings	134
Operating without connecting to a TV	135
Operating Each Component Using the On-screen Remote (Quick Click)	142
Operating components or lighting connected to the receiver using the on-screen remote (Quick Click)	142
Using Quick Click	143
Setting components that are operated by the on-screen remote	148
Performing several commands in sequence automatically with Quick Click (Macro Play)	148
Setting remote control codes that are not stored in Quick Click	150
Resetting the remote code for Quick Click	151
Operating Each Component Using the Multifunction Remote	152
Operating each component using the multifunction remote	152
Programming the remote	153
Performing several commands in sequence automatically (Macro Play)	157
Setting remote commander codes that are not stored in the remote	158
Clearing all the contents of the remote’s memory	160
Additional Information	161
Precautions	161
Troubleshooting	162
Specifications	169

Match case Limit results 1 per page

107

Using Other Features

compatible with the Audio Return

Channel (ARC) function, the digital

optical audio signals are selected.

• OPT

Appears only when TV input is

selected, and specifies the digital optical

audio signals input to the TV OPTICAL

IN jack.

• ANALOG

Specifies the analog audio signals input

to the AUDIO IN (L/R) jacks.

Notes

• Some audio input modes may not be set up

depending on the input.

• When either the HDMI input, DIGITAL MEDIA

PORT adapter, Server, Rhapsody, SHOUTcast, or

SIRIUS is selected, “------” appears on the display,

and you cannot select other modes. Select an input

other than the HDMI input, DIGITAL MEDIA

PORT adapter, Server, Rhapsody, SHOUTcast, or

SIRIUS then set the audio input mode.

• When “2ch Analog Direct” is being used, or the

multi-channel input is selected, audio input is set to

“Analog.” You cannot select other modes.

• The Audio Return Channel (ARC) function does

not work in the following cases.

–

Your TV is not compatible with the Audio

Return Channel (ARC) function.

–

“Control for HDMI” is set to “OFF.”

–

When you do not connect the receiver to the

ARC compatible TV’s HDMI jack via an HDMI

cable.

Enjoying the sound/

images from other inputs

(Input Assign)

You can reassign video and/or audio signals to

another input.

Example) Connect the OPTICAL OUT jack of

the DVD player to the OPTICAL VIDEO 1 IN

jack of this receiver when you want to input

the only digital optical audio signals from the

DVD player.

Connect the component video jack of the DVD

player to the COMPONENT VIDEO IN 1/

COMPONENT VIDEO IN 2, or

COMPONENT VIDEO IN 3 jack of this

receiver when you want to input the video

signals from the DVD player. Assign video

and/or audio signals to the DVD input jack

using “Input Assign” in the Input menu.

Select “

Input” from the

menu, then press

Select the input name you want

to assign.

Press OPTIONS.

The option menu appears.

Select “Input Assign,” then

press

Select the audio and/or video

signals you want to assign to

the input selected in step 2,

then press

OPTIONS

continued