Home » Sony Manuals » Audio Components » Sony STR-DA5600ES » Manual Viewer

Sony STR-DA5600ES Operating Instructions (Large File - 18.8 MB) - Page 11

Lights up when the H.A.T.S. High, back contains an L.F.E. Low Frequency - arc

Add to My Manuals
Save this manual to your list of manuals

Page 11 highlights

ARC (page 106) TV input is selected and the Audio Return Channel (ARC) signals are detected. D HDMI OUT A + B (page 105) Lights up when the signals are output from the HDMI OUT A or B jack. + also lights up, along with A and B when the signals are output from both jacks. E SLEEP Lights up when the sleep timer is activated. F MEMORY A memory function, such as Name Input, etc., is activated. G ZONE 2/ZONE 3 Lights up while operation in zone 2/zone 3 is being enabled. H SERVER (page 85) Lights up when the server function is activated. I L.F.E. Lights up when the disc being played back contains an L.F.E. (Low Frequency Effects) channel. The L.F.E. channel signal is actually being reproduced, the bars underneath the letters light up to indicate the level. J SP AB (page 46) K BI-AMP Lights up when surround back speakers selection is set to "BI-AMP." L D.C.A.C. Lights up when auto calibration is performed. M D.L.L. Lights up when the D.L.L. (Digital Legato Linear) function is activated. N H.A.T.S. Lights up when the H.A.T.S. (High quality digital Audio Transmission System) function is activated. O Tuning indicators Lights up when the receiver tunes in radio stations, or satellite radio stations. SIRIUS (USA/Canadian model only) The SiriusConnect Home tuner is connected and "SIRIUS" is selected. ST Stereo broadcast MONO Monaural broadcast RDS (European model only) RDS information is received. CAT (USA/Canadian model only) The category mode is selected during the satellite radio operation. PRESET The tuning mode is set to the preset mode. P VOLUME Displays the current volume. Q D.RANGE Lights up when dynamic range compression is activated. R Dolby Digital Surround indicators Lights up one of the respective indicators when the receiver is decoding the corresponding Dolby Digital format signals. ;D Dolby Digital ;D+ Dolby Digital Plus ;D EX Dolby Digital Surround EX Note When playing a Dolby Digital format disc, be sure that you have made digital connections and that INPUT MODE is not set to "Analog." S DTS-HD indicators Light up when the receiver is decoding DTS-HD. DTS-HD Lights up constantly with the one of the following indicators. MSTR DTS-HD Master Audio HI RES DTS-HD High Resolution Audio continued 11GB

Section	Page
Table of Contents	6
Description and location of parts	8
Getting Started	20
Checking the connection appropriate for your components	20
1: Installing speakers	21
2: Connecting the monitor	25
3: Connecting the video components	26
4: Connecting the audio components	35
5: Connecting the IR Blaster	39
6: Connecting the antennas (aerials)	40
7: Connecting to the network	41
8: Preparing the receiver and the remote	43
9: Setting the speakers	44
10: Calibrating the appropriate speaker settings automatically (Auto Calibration)	47
11: Configuring the network settings of the receiver	53
12: Preparing a computer to use as a server	53
Guide to on-screen display operation	55
Playback	58
Enjoying sound/images from the component connected to the receiver	58
Enjoying sound/images from the components connected to the DIGITAL MEDIA PORT	60
Operating the TDM-iP50 using the GUI menu of the receiver	61
Tuning	64
Listening to FM/AM radio	64
Presetting FM/AM radio stations	66
Listening to satellite radio (USA/Canadian model only)	67
Connecting a satellite radio tuner	68
Preparing to listen to a satellite radio	68
Selecting a channel of the satellite radio	69
Presetting satellite radio channels	70
Restricting access to specific channels (Parental Lock)	71
Enjoying Surround Sound	74
Playing back with 2-channel sound	74
Playing back with multi-channel surround	75
Enjoying a surround effect for music	76
Enjoying a surround effect for movies	78
Using Network Features	81
About the network functions of the receiver	81
Enjoying content stored on the server	82
Enjoying the audio of a component connected to the receiver using other device via the home network	85
Using a controller	87
Listening to Rhapsody	88
Listening to SHOUTcast	91
Features of the Setup Manager application software	92
Using Multi-zone Features	94
What you can do with the Multi-zone function	94
Making a multi-zone connection	94
Setting the speakers in zone 2	98
Switching the zone setting of the remote	99
Operating the receiver from another zone (ZONE 2/ZONE 3 operations)	99
Using Other Features	102
Using “BRAVIA” Sync features	102
Switching the monitors that output the HDMI video signals	105
Outputting the HDMI signals even when the receiver is in standby mode (Pass Through)	105
Switching between digital and analog audio	106
Enjoying the sound/images from other inputs (Input Assign)	107
Using the sleep timer	109
Enjoying the surround effect at low volume levels (Night Mode)	109
Recording using the receiver	110
Switching the command mode of the receiver and the remote	111
Using a bi-amplifier connection	112
Adjusting Settings	114
Using the setting menu	114
Auto Calibration	115
Speaker settings	118
Surround settings	122
EQ settings	123
Multi Zone settings	124
Audio settings	125
Video settings	127
HDMI settings	129
Network settings	131
Quick Click settings	133
System settings	134
Operating without connecting to a TV	135
Operating Each Component Using the On-screen Remote (Quick Click)	142
Operating components or lighting connected to the receiver using the on-screen remote (Quick Click)	142
Using Quick Click	143
Setting components that are operated by the on-screen remote	148
Performing several commands in sequence automatically with Quick Click (Macro Play)	148
Setting remote control codes that are not stored in Quick Click	150
Resetting the remote code for Quick Click	151
Operating Each Component Using the Multifunction Remote	152
Operating each component using the multifunction remote	152
Programming the remote	153
Performing several commands in sequence automatically (Macro Play)	157
Setting remote commander codes that are not stored in the remote	158
Clearing all the contents of the remote’s memory	160
Additional Information	161
Precautions	161
Troubleshooting	162
Specifications	169

Match case Limit results 1 per page

ARC (page 106)

TV input is selected and the Audio Return

Channel (ARC) signals are detected.

HDMI OUT A + B (page 105)

Lights up when the signals are output

from the HDMI OUT A or B jack. + also

lights up, along with A and B when the

signals are output from both jacks.

SLEEP

Lights up when the sleep timer is

activated.

MEMORY

A memory function, such as Name Input,

etc., is activated.

ZONE 2/ZONE 3

Lights up while operation in zone 2/zone

3 is being enabled.

SERVER (page 85)

Lights up when the server function is

activated.

L.F.E.

Lights up when the disc being played

back contains an L.F.E. (Low Frequency

Effects) channel. The L.F.E. channel

signal is actually being reproduced, the

bars underneath the letters light up to

indicate the level.

SP AB (page 46)

BI-AMP

Lights up when surround back speakers

selection is set to “BI-AMP.”

D.C.A.C.

Lights up when auto calibration is

performed.

D.L.L.

Lights up when the D.L.L. (Digital

Legato Linear) function is activated.

H.A.T.S.

Lights up when the H.A.T.S. (High

quality digital Audio Transmission

System) function is activated.

Tuning indicators

Lights up when the receiver tunes in radio

stations, or satellite radio stations.

SIRIUS (USA/Canadian model only)

The SiriusConnect Home tuner is

connected and “SIRIUS” is selected.

Stereo broadcast

MONO

Monaural broadcast

RDS (European model only)

RDS information is received.

CAT (USA/Canadian model only)

The category mode is selected during the

satellite radio operation.

PRESET

The tuning mode is set to the preset mode.

VOLUME

Displays the current volume.

D.RANGE

Lights up when dynamic range

compression is activated.

Dolby Digital Surround indicators

Lights up one of the respective indicators

when the receiver is decoding the

corresponding Dolby Digital format

signals.

;

Dolby Digital

;

D+

Dolby Digital Plus

;

D EX

Dolby Digital Surround EX

Note

When playing a Dolby Digital format disc, be

sure that you have made digital connections

and that INPUT MODE is not set to “Analog.”

DTS-HD indicators

Light up when the receiver is decoding

DTS-HD.

DTS-HD

Lights up constantly with the one of the

following indicators.

MSTR

DTS-HD Master Audio

HI RES

DTS-HD High Resolution Audio

continued