Home » Sony Manuals » Audio Components » Sony STR-DA5600ES » Manual Viewer

Sony STR-DA5600ES Operating Instructions (Large File - 18.8 MB) - Page 124

Multi Zone settings, Zone2 Line Out Level, 12V Trigger

Add to My Manuals
Save this manual to your list of manuals

Page 124 highlights

Multi Zone settings You can make settings for the main zone, zone 2 or zone 3. Multi Zone Setup To turn the power on or off for zone 2/zone 3 You can turn zone 2 or zone 3 operation on or off. "Main" (this receiver) is always selected. You cannot turn it off. 1 Select the zone you want to turn on or off, then press . 2 Select "ON" or "OFF," then press . x ON x OFF To select the output source for each zone You can select the source that is output to the zone. Audio and video signals are output to zone 2, while only audio signals are output to zone 3. 1 Select the zone to which you want to output audio/video signals, then press . 2 Select "Input," then press . 3 Select the input, then press . To adjust the volume for zone 2 You can adjust the volume in the main zone. If "Sur Back Assign" is set to "ZONE2" in the Speaker settings menu, you can also adjust the volume of zone 2. If you set "Zone2 Line Out Level" to "VARIABLE," you can also adjust the volume using "Multi Zone Setup." 1 Select the zone for which you want to adjust the volume, then press . 2 Select "Volume," then press . 3 Adjust the volume, then press . To preset the volume for main zone/zone 2 You can preset the volume of turning the power on for each zone. 1 Select the zone for which you want to preset the volume, then press . 2 Select "Preset Volume," then press . 3 Adjust the volume, then press . During the adjustment, the sound is output at the volume level to which you have adjusted it, regardless of the value of MASTER VOLUME control. If you select "OFF," each zone is activated at the same volume as that in effect when you turned the power off last time. Note • You cannot preset the volume for zone 2 in the following cases. - "Sur Back Assign" is set to "OFF" or "BIAMP." - "Zone2 Line Out Level" is set to "FIXED." Zone2 Line Out Level Lets you set the volume control for the ZONE 2 AUDIO OUT jacks to "VARIABLE" or "FIXED." For details, see "Set the volume control for zone 2" (page 98) x FIXED x VARIABLE 12V Trigger You can turn the receiver on or off in another zone, or select various options for use of the 12V Trigger function. 124GB

Section	Page
Table of Contents	6
Description and location of parts	8
Getting Started	20
Checking the connection appropriate for your components	20
1: Installing speakers	21
2: Connecting the monitor	25
3: Connecting the video components	26
4: Connecting the audio components	35
5: Connecting the IR Blaster	39
6: Connecting the antennas (aerials)	40
7: Connecting to the network	41
8: Preparing the receiver and the remote	43
9: Setting the speakers	44
10: Calibrating the appropriate speaker settings automatically (Auto Calibration)	47
11: Configuring the network settings of the receiver	53
12: Preparing a computer to use as a server	53
Guide to on-screen display operation	55
Playback	58
Enjoying sound/images from the component connected to the receiver	58
Enjoying sound/images from the components connected to the DIGITAL MEDIA PORT	60
Operating the TDM-iP50 using the GUI menu of the receiver	61
Tuning	64
Listening to FM/AM radio	64
Presetting FM/AM radio stations	66
Listening to satellite radio (USA/Canadian model only)	67
Connecting a satellite radio tuner	68
Preparing to listen to a satellite radio	68
Selecting a channel of the satellite radio	69
Presetting satellite radio channels	70
Restricting access to specific channels (Parental Lock)	71
Enjoying Surround Sound	74
Playing back with 2-channel sound	74
Playing back with multi-channel surround	75
Enjoying a surround effect for music	76
Enjoying a surround effect for movies	78
Using Network Features	81
About the network functions of the receiver	81
Enjoying content stored on the server	82
Enjoying the audio of a component connected to the receiver using other device via the home network	85
Using a controller	87
Listening to Rhapsody	88
Listening to SHOUTcast	91
Features of the Setup Manager application software	92
Using Multi-zone Features	94
What you can do with the Multi-zone function	94
Making a multi-zone connection	94
Setting the speakers in zone 2	98
Switching the zone setting of the remote	99
Operating the receiver from another zone (ZONE 2/ZONE 3 operations)	99
Using Other Features	102
Using “BRAVIA” Sync features	102
Switching the monitors that output the HDMI video signals	105
Outputting the HDMI signals even when the receiver is in standby mode (Pass Through)	105
Switching between digital and analog audio	106
Enjoying the sound/images from other inputs (Input Assign)	107
Using the sleep timer	109
Enjoying the surround effect at low volume levels (Night Mode)	109
Recording using the receiver	110
Switching the command mode of the receiver and the remote	111
Using a bi-amplifier connection	112
Adjusting Settings	114
Using the setting menu	114
Auto Calibration	115
Speaker settings	118
Surround settings	122
EQ settings	123
Multi Zone settings	124
Audio settings	125
Video settings	127
HDMI settings	129
Network settings	131
Quick Click settings	133
System settings	134
Operating without connecting to a TV	135
Operating Each Component Using the On-screen Remote (Quick Click)	142
Operating components or lighting connected to the receiver using the on-screen remote (Quick Click)	142
Using Quick Click	143
Setting components that are operated by the on-screen remote	148
Performing several commands in sequence automatically with Quick Click (Macro Play)	148
Setting remote control codes that are not stored in Quick Click	150
Resetting the remote code for Quick Click	151
Operating Each Component Using the Multifunction Remote	152
Operating each component using the multifunction remote	152
Programming the remote	153
Performing several commands in sequence automatically (Macro Play)	157
Setting remote commander codes that are not stored in the remote	158
Clearing all the contents of the remote’s memory	160
Additional Information	161
Precautions	161
Troubleshooting	162
Specifications	169

Match case Limit results 1 per page

124

Multi Zone settings

You can make settings for the main zone, zone

2 or zone 3.

To turn the power on or off for

zone 2/zone 3

You can turn zone 2 or zone 3 operation on or

off. “Main” (this receiver) is always selected.

You cannot turn it off.

Select the zone you want to turn on or

off, then press

Select “ON” or “OFF,” then press

OFF

To select the output source for

each zone

You can select the source that is output to the

zone. Audio and video signals are output to

zone 2, while only audio signals are output to

zone 3.

Select the zone to which you want to

output audio/video signals, then press

Select “Input,” then press

Select the input, then press

To adjust the volume for zone 2

You can adjust the volume in the main zone.

If “Sur Back Assign” is set to “ZONE2” in the

Speaker settings menu, you can also adjust the

volume of zone 2.

If you set “Zone2 Line Out Level” to

“VARIABLE,” you can also adjust the volume

using “Multi Zone Setup.”

Select the zone for which you want to

adjust the volume, then press

Select “Volume,” then press

Adjust the volume, then press

To preset the volume for main

zone/zone 2

You can preset the volume of turning the

power on for each zone.

Select the zone for which you want to

preset the volume, then press

Select “Preset Volume,” then press

Adjust the volume, then press

During the adjustment, the sound is output

at the volume level to which you have

adjusted it, regardless of the value of

MASTER VOLUME control.

If you select “OFF,” each zone is activated

at the same volume as that in effect when

you turned the power off last time.

Note

• You cannot preset the volume for zone 2 in the

following cases.

–

“Sur Back Assign” is set to “OFF” or “BI-

AMP.”

–

“Zone2 Line Out Level” is set to “FIXED.”

Lets you set the volume control for the ZONE

2 AUDIO OUT jacks to “VARIABLE” or

“FIXED.” For details, see “Set the volume

control for zone 2” (page 98)

FIXED

VARIABLE

You can turn the receiver on or off in another

zone, or select various options for use of the

12V Trigger function.

Multi Zone Setup

Zone2 Line Out Level

12V Trigger