Sony STR-DG600 Operating Instructions - Page 30

5: Preparing the receiver and the remote Connecting the AC power cord Connect the AC power cord to a wall outlet. AC power cord AC OUTLET* L - ND BACK L L - NT A + - R FRONT B AC OUTLET To the wall outlet * The configuration, shape and number of AC outlets will vary according to the area code of the receiver you purchased. Notes • Install this system so that the power cord can be unplugged from the wall socket immediately in the event of trouble. • The AC OUTLET(s) on the rear of the receiver is a switched outlet, which supplies power to the connected component only while the receiver is turned on. • Make sure that the total power consumption of the component(s) connected to the receiver's AC OUTLET(s) does not exceed the wattage stated on the rear panel. Do not connect high-wattage electrical home appliances such as electric irons, fans, or TVs to this outlet. This may cause a malfunction. Performing initial setup operations Before using the receiver for the first time, initialize the receiver by performing the following procedure. This procedure can also be used to return settings you have made to their factory defaults. Be sure to use the buttons on the receiver for this operation. 1,2 ?/1 SPEAKERS (OFF/A/B/A+B) AUTO CAL MIC PHONES TUNING MODE - TUNING + VIDEO 3 IN/PORTABLE AV IN VIDEO L AUDIO R DIGITAL(OPT) MULTI CHANNEL DECODING DISPLAY INPUT MODE INPUT SELECTOR MASTER VOLUME MEMORY/ CATEGORY ENTER MODE CATEGORY 2CH A.F.D. MOVIE MUSIC MULTI CH IN DIRECT 3 1 Press ?/1 to turn off the receiver. "TURNING" and "OFF" appears on the display alternately and then "COMPLETE" appears. 2 Hold down ?/1 for 5 seconds. "PUSH" and "ENTER" appears on the display alternately. 30US