Sony STR-DG600 Operating Instructions - Page 85

Frequency response Analog 10 Hz - 70 kHz +0.5/-2 dB (with sound field and equalizer bypassed) Inputs Analog Sensitivity: 500 mV/ 50 kohms S/N3): 96 dB (A, 500 mV4)) Digital (Coaxial) Impedance: 75 ohms S/N: 100 dB (A, 20 kHz LPF) Digital (Optical) S/N: 100 dB (A, 20 kHz LPF) Outputs (Analog) AUDIO OUT Voltage: 500 mV/10 kohms SUB WOOFER, SURROUND Voltage: 2 V/1 kohm Equalizer Gain levels ±6 dB, 1 dB step 3)INPUT SHORT (with sound field and equalizer bypassed). 4)Weighted network, input level. FM tuner section Tuning range 87.5 - 108.0 MHz Intermediate frequency 10.7 MHz Useable sensitivity 11.2 dBf, 1 µV/75 ohms S/N Mono/Stereo 76 dB/70 dB Harmonic distortion at 1 kHz Mono/Stereo 0.3%/0.5% Separation 45 dB at 1 kHz Frequency response 30 Hz - 15 kHz, +0.5/-2 dB AM tuner section Tuning range Area code Tuning scale 10 kHz step 9 kHz step U, CA 530 - 531 - 1,710 kHz5) 1,710 kHz5) Intermediate frequency 450 kHz Usable sensitivity 50 dB µ/m (at 1,000 kHz or 999 kHz) 5)You can change the AM tuning scale to 9 kHz or 10 kHz. After tuning in any AM station, turn off the receiver. While holding down TUNING MODE, press ?/1. All preset stations will be erased when you change the tuning scale. To reset the scale to 10 kHz (or 9 kHz), repeat the procedure. Video section Inputs/Outputs Video: 1 Vp-p/75 ohms S-video: Y: 1 Vp-p/75 ohms C: 0.286 Vp-p/75 ohms COMPONENT VIDEO: Y: 1 Vp-p/75 ohms PB/CB/B-Y: 0.7 Vp-p/ 75 ohms PR/CR/R-Y: 0.7 Vp-p/ 75 ohms 80 MHz HD Pass Through General Power requirements Area code Power requirements U, CA 120 V AC, 60 Hz Power consumption Area code Power consumption U 230 W CA 310 VA Power consumption (during standby mode) 0.2 W AC outlets Area code U, CA AC outlets 1 switched, 120 W/1A MAX Dimensions (w/h/d) (Approx.) 430 × 157.5 × 316 mm (16 7/8 × 6 2/8 × 12 4/8 inches) including projecting parts and controls Mass (Approx.) 8.0 kg (17 lb 11 oz) continued 85US Additional Information