Sony VPL CX5 Operating Instructions - Page 23
Projecting - lcd
UPC - 027242598874
View all Sony VPL CX5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Projecting Setting Up and Projecting 7 Rear remote control 6 detector FREEZE MS SLIDE I / 1 KEYSTONE INPUT APA MENU PIC ENTER MUTING TILT ON/STANDBY indicators 2 4 1 Open the connector panel, plug the AC power cord into a wall outlet, then connect all equipment. The ON/STANDBY indicator lights in red and the projector goes into standby mode. 2 Press the I / 1 key. The ON/STANDBY indicator lights in green and the Intelligent Auto-setup starts. The lens protector opens, and the powered tilt adjuster rises and stops at the previously adjusted position. 3 Turn on the equipment connected to the projector. Depending on the type of your computer, for example a notebook, or an all-inone LCD type, you may have to switch the computer to output to the projector by pressing certain keys (e.g., / LCD VGA , / , etc.), or by changing your computer's settings. Projecting 23 GB