TEAC CD-P800NT Owner's Mamual (English, Français, Español) - Page 48
Update, CDP via USB?
View all TEAC CD-P800NT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Settings (continued) The submenus appear in the following order. IP Address View/set the IP address. MAC Address View this unit's MAC address. DHCP Enable (default setting) DHCP is enabled. Disable DHCP is disabled. Subnet Mask View/set the subnet mask. Gateway View/set the default gateway. DNS Server View/set the DNS server address. Proxy URL Set the proxy server address. Proxy Port Set the proxy port number. oo This only appears when a proxy URL has been set. Net Standby This sets whether or not the unit can be controlled over a network when the unit is in standby. Disable (default setting) When the unit is in standby, it cannot be controlled over a network. Enable When the unit is in standby, it can be controlled over a network. oo When set to "Enable", more power will be consumed when the unit is in standby. Update You can update the firmware of this unit. Do not put the unit in standby during an update. oo See "Updating the firmware" on page 49 for update procedures. Version This shows the current firmware version. This unit has two types of firmware: Main and DSP. Their versions are shown in the following format. abcd-ef00-000 Main: a.bc DSP: d.ef Example If "1001-0100-000" appears, the firmware versions are as follows. Main: 1.00 DSP: 1.01 CDP via USB? You can update the firmware using a USB flash drive. 48