TEAC CD-P800NT Owner's Mamual (English, Français, Español) - Page 51
Error codes
View all TEAC CD-P800NT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
ENGLISH 9 Use the direction (k/j) buttons to select "CDP via USB?" and press the ENTER button. c oo This selection will not appear (and cannot be selected) if the flash drive does not contain firmware that can be used to update the unit. 10 Select "UpdateStart?" and press the ENTER button. The unit firmware starts to be updated. 11 After "Complete" appears, disconnect the USB flash drive. 12 Press the STANDBY/ON button to put the unit into standby. Error codes When an error occurs, "Error! *-**" or an error message appears on the display of this unit. (Letters and numbers appear in place of the asterisks.) Refer to the error code list to check the meaning. Error codes *-10, *-20 *-14 Other codes Meaning and countermeasures The USB flash drive could not be recognized. Confirm that the USB flash drive or USB cable is securely connected to the USB port on the front of the unit. The root folder of the USB flash drive does not contain a firmware file or the firmware file is for a different model, for example. Follow the instructions on the CD-P800NT product website to download the firmware and conduct the process again. If the same error occurs repeatedly, make a note of the error code and contact your dealer. Conduct the process again from the beginning. If the same error occurs repeatedly, make a note of the error code and contact your dealer. oo If an error occurs during an update, unplug the unit's power cord once and plug it into the outlet again before trying the update one more time. oo Do not use the remote control STANDBY/ON (¤) button in this case. oo If you do nothing for three minutes, the unit will enter standby automatically. This completes the update. The unit should now be using the latest firmware. 51