TEAC DM-3200 DM-3200 Owner's Manual - Page 10
About the DM-3200 - 32 channel
View all TEAC DM-3200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
1 - Introduction : About the DM-3200 About the DM-3200 The DM-3200 provides a fully comprehensive range of I/O facilities. Almost all inputs and internal busses are "soft", allowing connections to be patched internally (naturally, routing configurations may be stored and recalled). Inputs For analog input, the DM-3200 provides sixteen balanced inputs, with both high-quality mic amps, and balanced line connections as well as analog insert points (both mic and line connections may be made to the same channel at the same time, but only one may be used at a time). There are also four assignable send outputs and inputs for external loop effects. The digital side comprises three TDIF I/O ports, as well as ADAT "lightpipe" I/O, and two pairs of stereo S/PDIF or AES/EBU inputs and outputs. Two TASCAM-standard card slots provide I/O expansion capabilities, with a variety of digital or analog options being available, including a FireWire expansion card for direct high-speed bidirectional communication between a DAW and the DM-3200. Channel modules The DM-3200 provides 48 channel modules. These may be freely assigned internally to the 16 buss modules. Of these 48 channel modules, 32 are "full-function" modules with 4-band EQ, digital trim and phase, and full dynamics processing with compressor/expanders and gates. The other 16 are more basic in the facilities provided, but still provide full buss assignment and aux sends. The first 32 EQ-enabled channels can have two sources (input and return), which may be freely assigned, and can be switched, depending on whether the project is in the recording or tracking stage. See the section on assignments ("Routing & assignment" on page 46) for details of how channel sources are assigned, Inputs (hardwarte) Mixer channels Channel destinations Outputs (hardware) ³ Mic/Line inputs (x 16) Assignable returns (x 4) Digital stereo inputs (x 2) TDIF inputs (x 24) ADAT inputs (x 8) Option slots Cascade 2-track in ³ 32 full-EQ channels 16 non-EQ channels ³ Assignable internal inserts (x 16) - full-EQ channels only Direct outs (x 32) Aux sends (x 8) Busses (x 16) Stereo buss ³ TDIF x 24 ADAT x 8 Assignable sends x 4 Option slots Cascade Stereo outs (analog & digital) CR outs Studio outs Figure 1.1: Basic logical components of the DM-3200a a. Note that cascade connections are not available on the first release of the DM-3200 software. 10 TASCAM DM-3200 Owner's Manual