TEAC DM-3200 DM-3200 Owner's Manual - Page 103
Digital audio I/O, Miscellaneous I/O connections
View all TEAC DM-3200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
9 - Specifications : Digital audio I/O Digital audio I/O DIGITAL INPUTS (1, 2) DIGITAL OUTPUTS (1, 2) TDIF-1(1, 2, 3) ADAT IN/OUT Sampling frequencies Signal delay 2 x XLR-type female connectors (input impedance 110 Ω) or 2 x RCA pin jacks (input impedance 75 Ω) (selectable) AES3-1992 or IEC60958 data format (automatically detected) 24-bit word length Switchable sampling frequency conversion available 2 x XLR-type male connectors (output impedance 110 Ω) 2 x RCA pin jacks (output impedance 75 Ω) AES3-1992 or IEC60958 data format (software selectable) 24-bit word length 3 x 25-pin (female) D-sub connectors (metric lock screws) Conform to TDIF-1 standard 24-bit word length 2 x "Lightpipe" optical connectors Conform to ADAT OPTICAL specifications 24-bit word length Internal 44.1 kHz/48 kHz, 88.2 kHz/96 kHz (high sampling frequencies) External ±6.0% < 1.7 ms - Fs = 48 kHz, LINE IN to STEREO OUTPUT < 0.85 ms - Fs = 96 kHz, LINE IN to STEREO OUTPUT Miscellaneous I/O connections WORD SYNC IN WORD SYNC OUT/THRU MIDI IN, OUT, THRU/MTC OUT USB TIME CODE IN FOOT SW TO METER RS-422 (for Sony 9-pin) GPI (for Machine start) BNC connector Switchable 75 Ω termination TTL level BNC connector Switchable between through and output TTL level 3 x 5-pin DIN connectors-conform to MIDI specifications USB 1.1 'B' type connector (12 Mbps) RCA pin jack Conforms to SMPTE specifications 1/4" mono jack 25-pin female D-sub connector (non-metric lock screws) For use with the optional MU-1000 9-pin female D-sub connector (non-metric lock screws) wired to RS-422 standards 9-pin female D-sub connector (non-metric lock screws) wired for GPI control Pin 1=GP11, Pin 2=GPI2, Pin 3=GPI3, Pin 4=GPI4, Pin 5=GND, Pin 6=GPI5, Pin 7=GPI6, Pin 8=GPI7, Pin 9=GP18 TASCAM DM-3200 Owner's Manual 103