TEAC DM-3200 DM-3200 Owner's Manual - Page 80
Storing snapshots, Information about a snapshot, key to edit the name of the snap
View all TEAC DM-3200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
5 - Channel modules : Snapshots Storing snapshots Snapshots may be stored to any of the four banks on the CF card. • The cursor keys are used on the right side of the screen to select the bank in which the snapshot is stored, and the POD 4 encoder is used to select the destination. Alternatively, the direct LIBRARY keys may be used for this purpose. Either press the POD 2 switch (STORE AS) or use the on-screen STORE button and ENTER: • On the left side of the screen, use the wheel and ENTER key to edit the name of the snapshot. The name can be copied from an existing entry and pasted to a library entry. • POD 2 is used to alter the transition time (Xtion). This time can also be copied to and from library entries. • Finally, the POD 2 switch (STORE) is used to store the current settings to the selected slot (or POD 3 (CANCEL) is used to cancel the operation). If a snapshot already exists in the destination area, a popup message appears to confirm the overwriting operation. Figure 5.37: Storing a snapshot Information about a snapshot When the library screen is visible, pressing the POD 4 switch brings up a popup information panel about the snapshot whose library entry is highlighted in the right-hand list. The panel contains the following information: • Name and transition time. • Creation date and time (card bank data only). • Project with which the snapshot is associated, together with the sampling frequency used (card bank data only). 80 TASCAM DM-3200 User's Manual