TEAC DM-3200 DM-3200 Owner's Manual - Page 54
Monitoring, Selecting the CR source
View all TEAC DM-3200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
4 - Routing & assignment : Monitoring Monitoring The DM-3200 provides comprehensive monitoring and metering facilities allowing both control room and studio cue mixes to be produced. This section describes the monitoring procedures and setup when working in stereo. When working with surround mixes, there are obviously some important differences, and these are described in "Surround operations" on page 75. Figure 4.9: Monitoring and metering controls Selecting the CR source The four dedicated keys and indicators to the right of the meters allow instant switching of the control room monitor sources and the two PHONES outputs, which mirror the output from the control room monitor outputs. The first key is hard-wired to the stereo buss (STEREO) and cannot be changed. The next three keys, in order, default to the aux 1-2 sends (typically used for studio cue), digital input 1 (e.g. a stereo recorder) and the analog 2-track inputs (again, this could be a stereo master recorder). 54 TASCAM DM-3200 User's Manual