TEAC PDH600 Owners Manual - Page 16

Programmed Playback (Audio CD only) 1 CLEAR 2 3 You can play up to 30 tracks in a desired order. < Insert a disc before programming. 1 Enter the program mode. Press the PROGRAM button. Note < When you stop programmed playback, the total number of the programmed tracks and total time are shown on the display. < When you press the SHUFFLE button during programmed playback or you press the SHUFFLE button then press the play/ pause button (G/J) while programmed playback is stopped, shuffle playback starts, but program mode will not be cancelled. You can return to the programmed playback by stopping shuffle playback and pressing the play/pause button (G/J). To stop programmed playback Press the stop button (H). Stop PROGRAM P-00 T00 < You cannot program during playback. 2 Select a track using the numeric buttons. Example: to select track/file 15 < When the stop button (H) is pressed, playback stops, but program mode will not be cancelled. You can return to programmed playback by pressing the play/pause button (G/J). Stop PROGRAM P-01 T15 Program number Selected track number To check the programmed order Press the PROGRAM button repeatedly while playback is stopped. Repeat the selection until you finish programming desired tracks. < If you attempt to program more than 30 tracks, "P-full" (Program is full) appears and no more tracks can be programmed. < To correct a selection, press the CLEAR button. The last programmed track is cleared. < If you press the stop button (H), all the programmed tracks are cleared. 3 Start programmed playback. Press the play/pause button (G/J). The track number and program number are shown on the display. "P-end" appears at the end of the program. < To return to the normal display of programmed playback, start and stop programmed playback. < "PRG" is displayed during programmed playback and while it is stopped. < Playback stops automatically after all programmed tracks are played. 16