TEAC PDH600 Owners Manual - Page 7

Remote Control Unit, MP3 and WMA, Battery Installation - cd

Page 7 highlights

ENGLISH MP3 and WMA Remote Control Unit This unit can play MP3 and WMA files recorded on a CD-R or CD-RW disc. < File names of MP3 or WMA should be alphanumeric characters. This unit cannot display symbols and full-size or double-byte characters (such as Japanese, Chinese, etc.) correctly. Also, be sure to use the file extension. (".mp3" for MP3 files, ".wma" for WMA files.) < MP3 files are mono or stereo MPEG-1 Audio Layer 3 format. This unit can play MP3 files with a sampling frequency of 44.1 kHz or 48 kHz and a bit-rate of 320 kbps or less. < This unit can play WMA files with a sampling frequency of 44.1 kHz and a bit-rate of 192 kbps or less. < Audio encoded at 128 Kbps should sound close to regular audio CD quality. Although this unit plays lower bit-rate MP3 tracks, the sound quality deteriorates noticeably at lower bit-rates. You can operate the unit using the supplied remote control unit RC-1182. When operating the remote control unit, point it towards the remote sensor on the front panel of the unit. < Remote control operation may be impossible if there are any obstacles between the unit and the remote control. < If the remote control unit is operated near other appliances which generate infrared rays, or if other remote control devices using infrared rays are used near the unit, it may operate incorrectly. Conversely, the other appliances may operate incorrectly. Battery Installation 1. Remove the battery compartment cover. < The disc must be finalized in order to play. < The CD-ROM must be ISO 9660 compatible. < When more than 255 files are recorded on a disc, the unit might not play it correctly. 2. Insert two "AAA" (R03, UM-4) dry batteries. Make sure that the batteries are inserted with their positive "+" and negative "_" poles positioned correctly. 3. Close the cover. Battery Replacement If the effective range decreases, the batteries are exhausted. In this case replace the batteries with new ones. Precautions concerning batteries < Be sure to insert the batteries with correct positive "+" and negative "_" polarities. < Use batteries of the same type. Never use different types of batteries together. < Rechargeable and non-rechargeable batteries can be used. Refer to the precautions on their labels. < When the remote control unit is not to be used for a long time (more than a month), remove the batteries from the battery compartment to prevent them from leaking. If they leak, wipe away the liquid inside the battery compartment and replace the batteries with new ones. < Do not heat or disassemble batteries and never dispose of old batteries by throwing them in a fire. 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52

7
ENGLISH
This unit can play MP3 and WMA files recorded on a CD-R or CD-RW
disc.
<
File names of MP3 or WMA should be alphanumeric characters.
This unit cannot display symbols and full-size or double-byte
characters (such as Japanese, Chinese, etc.) correctly. Also, be
sure to use the file extension. (”.mp3” for MP3 files, ”.wma” for
WMA files.)
<
MP3 files are mono or stereo MPEG-1 Audio Layer 3 format. This
unit can play MP3 files with a sampling frequency of 44.1 kHz or
48 kHz and a bit-rate of 320 kbps or less.
<
This unit can play WMA files with a sampling frequency of 44.1
kHz and a bit-rate of 192 kbps or less.
<
Audio encoded at 128 Kbps should sound close to regular audio
CD quality. Although this unit plays lower bit-rate MP3 tracks, the
sound quality deteriorates noticeably at lower bit-rates.
<
The disc must be finalized in order to play.
<
The CD-ROM must be ISO 9660 compatible.
<
When more than 255 files are recorded on a disc, the unit might
not play it correctly.
Remote Control Unit
You can operate the unit using the supplied remote control unit
RC-1182.
When operating the remote control unit, point it towards the
remote sensor on the front panel of the unit.
<
Remote control operation may be impossible if there are any
obstacles between the unit and the remote control.
<
If the remote control unit is operated near other appliances which
generate infrared rays, or if other remote control devices using
infrared rays are used near the unit, it may operate incorrectly.
Conversely, the other appliances may operate incorrectly.
Battery Installation
1. Remove the battery compartment cover.
2. Insert two ”AAA” (R03, UM-4) dry batteries. Make sure that the
batteries are inserted with their positive ”
+
” and negative ”
_
poles positioned correctly.
3. Close the cover.
Battery Replacement
If the effective range decreases, the batteries are exhausted. In
this case replace the batteries with new ones.
Precautions concerning batteries
<
Be sure to insert the batteries with correct positive ”
+
” and
negative ”
_
” polarities.
<
Use batteries of the same type. Never use different types of
batteries together.
<
Rechargeable and non-rechargeable batteries can be used.
Refer to the precautions on their labels.
<
When the remote control unit is not to be used for a long time
(more than a month), remove the batteries from the battery
compartment to prevent them from leaking. If they leak, wipe
away the liquid inside the battery compartment and replace the
batteries with new ones.
<
Do not heat or disassemble batteries and never dispose of old
batteries by throwing them in a fire.
MP3 and WMA