TEAC PDH600 Owners Manual - Page 17

ENGLISH To delete a track from the program While playback is stopped, press the PROGRAM button repeatedly until the track number to be deleted appears on the display, then press the CLEAR button. Dimmer The selected track is deleted from the program and the next track is displayed. < If you hold down the CLEAR button for more than 3 seconds, all the tracks will be cleared. Each time you press the DIMMER button, the display changes as follows: NORMAL (Normal) DIMMER (Dimmed) LIGHT OFF (Display off) To add a track to the program While playback is stopped, press the PROGRAM button repeatedly until the program number that you want to insert a track appears on the display. Then select a track using the numeric buttons. Note < This setting is not memorized when the unit turns standby/on. The next time the unit is turned on, the display is illuminated as normal. < When the unit is operated during the setting is "LIGHT OFF", the display turns normal briefly and will turn off again. < The display is turned off about 5 seconds after the last operation regardless of the dimmer setting, if Tone Direct is active on the AG-H600 series receiver linked with this unit through the system control function. < When you want to add a track to the end of the program, press the PROGRAM button repeatedly until "P-end" appears on the display. Then select a track using the numeric buttons. To clear the program While playback is stopped, press the PROGRAM button, then press the stop button (H). < When you press one of the following buttons, the program is also cleared: open/close (L), STANDBY/ON on the remote control unit, POWER 17