TEAC PDH600 Owners Manual - Page 5
Before Use, During playback, When moving this unit, Beware of condensation, Maintenance - manual
View all TEAC PDH600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
ENGLISH Before Use Read this before attempting any operations. < As the unit may become warm during operation, always leave sufficient space around the unit for ventilation. < The voltage supplied to the unit should match the voltage as printed on the rear panel. If you are in any doubt regarding this matter, consult an electrician. < Choose the installation location of your unit carefully. Avoid placing it in direct sunlight or close to a source of heat. Also avoid locations subject to vibrations and excessive dust, heat, cold or moisture. < Do not place the unit on an amplifier/receiver. < Do not open the cabinet as this might result in damage to the circuitry or electrical shock. If a foreign object should get into the unit, contact your dealer or service company. < When removing the power plug from the wall outlet, always pull directly on the plug, never yank the cord. < To keep the laser pickup clean, do not touch it, and always close the disc tray. < Do not attempt to clean the unit with chemical solvents as this might damage the finish. Use a clean, dry cloth. < Keep this manual in a safe place for future reference. Beware of condensation When the unit (or a disc) is moved from a cold place to a warm place, or used after a sudden temperature change, there is a danger of condensation: vapor in the air could condense on the internal mechanism, making correct operation impossible. To prevent this, or if this occurs, leave the unit for one or two hours with the power turned on. Then the unit will stabilize at the temperature of its surroundings. Maintenance If the surface of the unit gets dirty, wipe with a soft cloth or use diluted neutral cleaning liquid. Be sure to remove any fluid completely. Do not use thinner, benzine or alcohol as they may damage the surface of the unit. During playback During playback, the disc rotates at high speed. Do not lift or move the unit during playback. Doing so may damage the disc or the unit. When moving this unit When moving or packing the unit, be sure to remove the disc and close the disc tray. Then, turn off the power and disconnect the power cord. Moving this unit with the disc loaded may result in damage to this unit. 5