TEAC TN-175 Owners Manual English Francais Espanol Deutsch Italiano Nederlands - Page 6

Playing records oo Remove the protective cap from the cartridge stylus before using the turntable. 1 Press the STANDBY/ON button on the back of the unit to turn it on. Basic operation 4 Turn the record size selection lever to select the record size. VV Do not place anything on top of the dust cover. ATTENTION oo During playback, do not touch the tonearm or the record. Doing so could damage the stylus tip and cause scratches on the record. oo Do not forcibly stop platter rotation during playback. Since this product is not a turntable designed for DJs (direct drive), doing something like this could cause malfunction. Stopping playback in the middle 2 Open the dust cover slowly. 5 Select the rotation speed indicated on the record. The rotation speed can be set to 33 1/3 or 45 RPM. During record playback, feedback could occur if the volume is too loud. If this happens, lower the volume of the amplifier. When playback finishes When the tonearm reaches the lead-out groove of the record, it will automatically rise and return to the tonearm holder, and the platter will stop turning. Press the STOP button during playback to make the tonearm rise and return to the tonearm holder. This also stops the platter turning. VV Be careful not to pinch your hand, for example, when opening and closing the dust cover. 3 Place a record on the platter. When playing a 45 RPM large-hole single record, use the included adapter. 6 6 Press the START button to start playback. The platter begins to turn, the tonearm moves to the outer edge of the record, the stylus lowers to the record, and playback begins. oo Close the dust cover during playback. Since doing this prevents skipping caused by unintended contact and blocks external sound pressure, it makes noise less likely to occur. oo This playback operation cannot be stopped in the middle. Starting playback from a track in the middle of the record 1 Use the tonearm lifter lever to raise the tonearm. 2 Move the tonearm so the cartridge sty- lus is at the track to be played back. When the tonearm is moved above the record, the platter will start turning. 3 Use the tonearm lifter lever to lower the tonearm. The tonearm lowers slowly until the stylus touches the record and playback begins.