Tanaka TED-270PFDH Owner's Manual - Page 9

Ted-270pfl/270pfls

Get Tanaka TED-270PFDH PDF manuals and user guides View all Tanaka TED-270PFDH manuals
Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

TED-270 Fig. 2-5 Fig. 2-5B TED-270PFL/270PFLS/ 270PFDH/270PFDLS Fig. 2-5C Drilling (Fig. 2-5, 5B) Always hold unit firmly with both hands on handles and body well balanced. Operate at a high engine speed and let drill bit do the work. Do not force bit into hole. If material become twisted around drill bit, stop engine, allow unit to cool and remove wire from spark plug before attempting to clear bit. Stop engine and inspect unit if abnormal vibration or noise is generated. How to operate Lock control (on TED270PFL/270PFLS/270PFDH/ 270PFDLS) (Fig. 2-5C) NOTE! Always stop the engine before operation of lock contorol. When bit has stuck in object, stop engine and turn on lock lever (1). Rotate whole unit counter-clockwise so that the bit can be pulled out easily. If the unit would not move, rotate it clockwise a little and then counterclockwise again. How to operate Reverse control (on TED-270PFR/270PFRS) (Fig. 2-5D) Decrease engine speed to idle and move shift lever (2) to R (Reverse) position, then accelerate to pull out. Shift lever may not move unless engine is running. If so, turn drill chuck a little bit by hand. * The purpose of Lock control and Reverse control is mainly for easy pullout of bit. GB-8 Fig. 2-5D

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
TED-270
GB-8
Fig. 2-5
Fig. 2-5B
Fig. 2-5D
Fig. 2-5C
Always hold unit firmly with both hands
on handles and body well balanced.
Operate at a high engine speed and let
drill
bit do the work.
Do not force bit into
hole.
If material become twisted around drill
bit, stop engine, allow unit to cool and
remove wire from spark plug before
attempting to clear bit.
Stop engine and inspect unit if abnormal
vibration or noise is generated.
How to operate Lock control
(on TED270PFL/270PFLS/270PFDH/
270PFDLS) (Fig. 2-5C)
NOTE!
Always stop the engine before operation of
lock contorol.
When bit has stuck in object, stop engine
and turn on lock lever (1).
Rotate whole unit counter-clockwise so
that the bit can be pulled out easily.
If the unit would not move, rotate it
clockwise a little and then counter-
clockwise again.
Drilling (Fig. 2-5, 5B)
Decrease engine speed to idle and move
shift lever (2) to R (Reverse) position,
then accelerate to pull out.
Shift lever may not move unless engine
is running. If so, turn drill chuck a little bit
by hand.
* The purpose of Lock control and
Reverse control is mainly for easy
pullout of bit.
How to operate Reverse control
(on TED-270PFR/270PFRS)
(Fig. 2-5D)
TED-270PFL/270PFLS/
270PFDH/270PFDLS