Toshiba 32HL85 Owners Manual - Page 19

Connecting your TV Using the remote control E Using the remote control to operate a cable F converter box, satellite receiver, VCR, DVD S player, or HTIB (home theater in a box) Introduction If you have a non-Toshiba device or a Toshiba device that the remote control is not preprogrammed to operate, you must first program the remote control to recognize the device (if you have not already done so). See pages 17 and 18. To use your TV remote control to operate a: • Cable converter box or satellite receiver, set the Device Switch to CBL/SAT. • VCR, set the Device Switch to VCR. • DVD player or HTIB, set the Device Switch to DVD. Note: Even after the TV remote control is programmed, it may not operate certain features on your other device. If this happens and you wish to use those features, you will need to use the device's original remote control. Point the remote control directly at the device. +10 Press to directly access DVD chapters higher than 10. TOP MENU Accesses a DVD's top menu. ENTER Required by some VCRs and cable converter boxes to change the channel. Device Switch Set to "TV" to control the TV; "CBL/SAT" to control a cable converter box or satellite receiver; "VCR" to control a VCR; "DVD" to control a DVD player or HTIB. PAUSE Press during play or record mode to pause the picture; press again to restart. TV/VCR To view one program while recording another, press to select TV mode. REW Rewinds the tape or DVD. (Press during play mode to view the picture moving rapidly backward.) REC Starts tape recording. FF Fast-forwards the tape or DVD. (Press during play mode to view the picture moving rapidly forward.) TOP FAVORITE ENTEERNT TV / VIDEO RECALL POWER INFO 123 456 78 +10 100 0 MENU FAV 9 CHRTN ENT GUID MENU DVDMENU ER FAV CLE TV CBL/SAT CH VCR DVD VOL POP DIRECT CH MUTE SLEEP TV/VCR PAUSE STOP PLAY FREEZE SOURCE SPLIT REW FF SKIP / SEARCH CH SCAN SWAP REC POP CH LIGHT CT-90159 EXIT AR E PIC SIZE POWER Turns the selected device on and off. INFO Displays TV status information onscreen. Channel Numbers (0-9) Press to directly access channels (as opposed to CH y z). DVD MENU Accesses DVD menus. GUIDE Displays channel guide. y z x • Press to navigate DVD menus (may not work on some DVD players). CLEAR Press to reset the title and chapter number. CH y z y selects the next higher channel; z selects the next lower channel. (for channels programmed into memory only) PLAY Begins playback of a tape or DVD. STOP Stops the tape or DVD. SKIP/SEARCH Skips forward to locate later DVD chapters. SKIP/SEARCH Skips back to beginning of current DVD chapter or locates previous chapters. Appendix Setting up your TV Using the TV's Features Index 19