Toshiba 57HLX82 Owners Manual - Page 30
Adding channels to the TV's memory
View all Toshiba 57HLX82 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Introduction Connecting your TV Using the Remote Control Adding channels to the TV's memory When you press Channel y or z, your TV will stop only on the channels you program into the TV's channel memory. Follow the steps below and on the next page to program all active channels into the TV's memory. Programming channels automatically Your TV can automatically detect all active channels in your area and store them into its memory. After the channels are programmed automatically, you can manually add or erase individual channels (see page 31). To program channels automatically: 1. Press MENU, and then press x or • until the SET UP menu appears. 2. Press y or z until TV/CABLE is highlighted. 3. Press x or • to highlight either TV or CABLE, depending on which you use. If you use an antenna, highlight TV; if you use cable, highlight CABLE. Note: To tune the TV to a channel not programmed in the channel memory, you must use the Channel Number buttons on the remote control. Channel Number SET UP LANGUAGE CLOCK SET ANT 1 / 2 TV / CABLE CH PROGRAM ADD / ERASE QUICK CONNECT GUIDE ENGL I SH 00:00 ANT1 TV / CABLE ADD MENU yzx • Channel yz 4. Press z to select CH PROGRAM. SET UP LANGUAGE CLOCK SET ANT 1 / 2 TV / CABLE CH PROGRAM ADD / ERASE QUICK CONNECT GUIDE ENGL I SH 00:00 ANT1 CABLE ADD 5. Press x or • to start channel programming. The TV will automatically cycle through all the TV or Cable channels (depending on which you selected), and store all active channels in the channel memory. While the TV is cycling through the channels, the message "Programming Now-Please Wait" appears. 6. When channel programming is complete, the message "Completed" appears. 7. Press Channel y or z to view the programmed channels. Setting up your TV Using the TV's Features Appendix Index 30 57HLX82(E)27-31 30 Downloaded from www.Manualslib.com manuals search engine 10/29/02, 10:28 AM