Toshiba D-R1 Owners Manual - Page 140
Specification
View all Toshiba D-R1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 140 highlights
Others Specification I Power requirement during operation 29W I Power requirement at standby 2.6W or below (Eco mode: off) 0.7W or below (Eco mode: on) I Power supply 120V AC, 60 Hz I Mass 4.2kg I External dimension Width 430 x Height 78 x Depth 325mm I Incoming channels TV: 2-69CH, CATV:1-125CH I Antenna input/output terminal VHF/UHF: 75Ω, F Connector I Demodulation input/output terminal 0.67Vp-p (75Ω) Unbalanced, Pin jack I Signal system Standard NTSC Color TV system I Laser Semiconductor laser, Wavelength: 650nm/780nm I Format DVD-VR format DVD-Video format I Image recording system MPEG2 I Sound recording system Dolby digital M1, M2, Linear PCM I Disc for recording images DVD-RAM disc (4.7GB for one side, 9.4GB for both sides) DVD-RW disc (4.7GB for one side) DVD-R disc (4.7GB for one side) I Image input 1.0Vp-p (75Ω), Synchronization negative, Pin jack x 2 systems, 2 at rear, 1 in front I Image output 1.0Vp-p (75Ω), Synchronization negative, Pin jack x 2 systems, 2 at rear I S Image input (Y) 1.0Vp-p (75Ω), Synchronization negative, Mini DIN4 Pin x 3 systems (C) 0.286Vp-p (75Ω), 2 at rear, 1 in front I S Image output (Y) 1.0Vp-p (75Ω), Synchronization negative, Mini DIN4 Pin x 2 systems (C) 0.286Vp-p (75Ω), 2 at rear I Component image output (Y, PB, PR) Y output (green), 1.0Vp-p (75Ω), Synchronization negative, Pin jack x 1 system PB, PR output (blue, red), 0.7Vp-p (75Ω), Pin jack x 1 system each I Sound input 2.0V (rms), 50kΩ or below, pin jack (L, R) x 3 systems 2 at rear, 1 in front I Sound output 2.0V (rms), 200Ω or above, pin jack (L, R) x 2 systems 2 at rear I Sound output (bit stream/PCM optical terminal) Optical connector x 1 system I Sound output (bit stream/PCM coaxial terminal) 0.5Vp-p (75Ω), pin jack x 1 system I DV input 4-pin x 1 in front 140