Toshiba D-R1 Owners Manual - Page 35
To set an end time of a recording which is
View all Toshiba D-R1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Introduction Recording Playback Editing To stop recording Press the STOP button. To pause recording (to omit an unnecessary portion) During recording, press the PAUSE button. To resume recording, press it again. Note • Pausing recording automatically creates a new chapter division at that point. To change a TV channel to be recorded 1) During recording, press the PAUSE button. Recording pauses. 2) Press the CHANNEL buttons to change the channel. 3) Press the PAUSE button to resume recording. To view a TV program while recording another 1) Start recording on this recorder. 2) On a connected TV, select the TV mode. 3) Using the channel selector of the TV, select a desired channel on the TV. To reduce noise on recordings (Rec DNR) Before recording, set "Rec DNR" ( page 129). To set an end time of a recording which is in progress 1) During recording, press the QUICK MENU button. The Quick Menu appears. 2) Press the / buttons to select "End Time" then press the ENTER button. The display changes as follows: e.g. End Time PM 2 :13 3) Press the / buttons to select an item then press the ADJUST button to change the value. 4) Press the ENTER button. Notes • By setting an end time, it is memorized as a programmed one, and the indicator in the front panel display illuminates to indicate that the recorder holds a timer program of recording. • The programmed end time must be set for after 5 minutes from the current time. To play a title recorded on a DVD-RAM disc while recording another on it (Recorded Title Play) DVD-RAM During recording, you can play a title recorded on the same disc. 1) While recording on a DVD-RAM disc, press the CONTENT MENU button. 2) Press the / / / buttons to select a desired title, then press the ENTER button. Playback of the selected title starts. Pressing the STOP button stops playback, and the content currently recorded returns. If you press the PLAY button, playback resumes from the location you last stopped. Notes • While you are using this function, the following operations/ functions are not available. - Programmed playback (repeat playback, intro scan etc.) - Editing (Playlist programming, dubbing, title/chapter naming, title thumbnail setting, etc.) • Depending on the data condition, playback may pause. Creating chapters while recording Press the CHP DIVIDE button. The content is divided into two chapters at the point you pressed the button. Note • If you want to divide into chapters at desired points on DVD-R/RW discs, use this method. On those discs, you cannot create chapters after recording. Creating chapters automatically at regular intervals Set "DVD-Video:CHP Create" ( page 130). Library Function setup Others 35